Any ideas what this Gear Box is from, casting number looks like 22G845, doesn't match any normal mini number
It's a 4 sync remote that I have been running on my mini for a couple of years , can't remember where I got it from.
| ausmini https://www.ausmini.com/forums/ |
|
| 4 syncro rodchange gear set into remote housing. https://www.ausmini.com/forums/viewtopic.php?f=2&t=88666 |
Page 1 of 1 |
| Author: | boomini [ Thu Feb 19, 2015 3:52 pm ] |
| Post subject: | 4 syncro rodchange gear set into remote housing. |
Hey all you gearbox experts. Just wonding if I can change a 4 synco gear set from a rod change box into a 3 syncro remote housing?? Cheers in advance. Rodney |
|
| Author: | 69cooper [ Thu Feb 19, 2015 4:09 pm ] |
| Post subject: | Re: 4 syncro rodchange gear set into remote housing. |
Rodney, pretty sure lay shafts are different, do u need a 4 syc casing ? mal |
|
| Author: | boomini [ Thu Feb 19, 2015 4:19 pm ] |
| Post subject: | Re: 4 syncro rodchange gear set into remote housing. |
Yeah I will swap the layshaft too. The new mini has a rod change and due to the supercharger only has 1 top engine steady so im worried about the engine rocking. I gave heaps of 4 synco rod change housings here but really want it to be remote The rod change box in the new car is freshly rebuilt . Rodney |
|
| Author: | ba_dm_tsh [ Thu Feb 19, 2015 4:24 pm ] |
| Post subject: | Re: 4 syncro rodchange gear set into remote housing. |
Short answer is no... If you get a clean/stripped case you'll need the remote reverse gear as well as all the gear shift gubbin's. |
|
| Author: | 69cooper [ Thu Feb 19, 2015 4:29 pm ] |
| Post subject: | Re: 4 syncro rodchange gear set into remote housing. |
Rodney, I should have a 998 4 sync remote , only issue is you will need to grid to suit 1275 crank, easily done as per Vizard tuning book, I will have a look tonight. you could also just fit bottom steady bars, mini spares or KAD do them Mal |
|
| Author: | drmini in aust [ Thu Feb 19, 2015 5:48 pm ] |
| Post subject: | Re: 4 syncro rodchange gear set into remote housing. |
69cooper wrote: Rodney, I should have a 998 4 sync remote , only issue is you will need to grid to suit 1275 crank, easily done as per Vizard tuning book, I will have a look tonight. you could also just fit bottom steady bars, mini spares or KAD do them Mal A 1275 will fit onto any 4 synchro remote box, either 22G1128 or 22G846, should be no grinding needed. re the previous question, NO the rodchange gears won't fit any 3 synchro box. But they will fit in a 4 synchro remote box, layshaft and all. The reverse gear is different though, use the remote box one.. |
|
| Author: | boomini [ Thu Feb 19, 2015 5:55 pm ] |
| Post subject: | Re: 4 syncro rodchange gear set into remote housing. |
Will get in touch with you soon malcom. Cheers. |
|
| Author: | mini_mad_matt [ Thu Feb 19, 2015 6:28 pm ] |
| Post subject: | Re: 4 syncro rodchange gear set into remote housing. |
See if the engine steady ben makes for the SC12 can fit with that setup |
|
| Author: | 69cooper [ Thu Feb 19, 2015 10:08 pm ] |
| Post subject: | Re: 4 syncro rodchange gear set into remote housing. |
Any ideas what this Gear Box is from, casting number looks like 22G845, doesn't match any normal mini number It's a 4 sync remote that I have been running on my mini for a couple of years , can't remember where I got it from.
|
|
| Author: | drmini in aust [ Thu Feb 19, 2015 10:14 pm ] |
| Post subject: | Re: 4 syncro rodchange gear set into remote housing. |
69cooper wrote: Any ideas what this Gear Box is from, casting number looks like 22G845, doesn't match any normal mini number It's a 4 sync remote that I have been running on my mini for a couple of years , can't remember where I got it from. That's a 22G846, as I mentioned above. Functionally the same as a 22G1128 4 synchro remote box. |
|
| Author: | 69cooper [ Thu Feb 19, 2015 10:18 pm ] |
| Post subject: | Re: 4 syncro rodchange gear set into remote housing. |
sorry, how did I miss that, thanks doc |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|