how hard is it to do?
have a free weekend and my mounts have arrived. might try and get them on
| ausmini https://www.ausmini.com/forums/ |
|
| changing engine mounts on a minimatic https://www.ausmini.com/forums/viewtopic.php?f=2&t=88675 |
Page 1 of 1 |
| Author: | Garagedefend [ Fri Feb 20, 2015 8:48 pm ] |
| Post subject: | changing engine mounts on a minimatic |
how hard is it to do? have a free weekend and my mounts have arrived. might try and get them on
|
|
| Author: | Scoop [ Fri Feb 20, 2015 9:27 pm ] |
| Post subject: | Re: changing engine mounts on a minimatic |
With your hoist it would be quite easy! |
|
| Author: | Garagedefend [ Fri Feb 20, 2015 9:37 pm ] |
| Post subject: | Re: changing engine mounts on a minimatic |
do you have a link to a write up or guide? I'll give it a shot lol |
|
| Author: | Scoop [ Fri Feb 20, 2015 9:45 pm ] |
| Post subject: | Re: changing engine mounts on a minimatic |
No I dont. Just do one at a time, use a block of wood with a jack or something to support the engine. Slow and steady wins the race! |
|
| Author: | Chux [ Fri Feb 20, 2015 10:24 pm ] |
| Post subject: | Re: changing engine mounts on a minimatic |
And use a screwdriver to line up the holes. I did both at the same time when I swapped engines, they were so tight compared to the old ones. Leave both sides loose until you get all the bolts in, then tighten them all up. This is just my experience, someone with more know-how than me might have a better way! |
|
| Author: | boomini [ Fri Feb 20, 2015 11:24 pm ] |
| Post subject: | Re: changing engine mounts on a minimatic |
Make sure you have plenty of your favorite drop and the neighbour kids aren't in ear shot... |
|
| Author: | 9YaTaH [ Sat Feb 21, 2015 9:37 am ] |
| Post subject: | Re: changing engine mounts on a minimatic |
boomini wrote: Make sure you have plenty of your favorite drop and the neighbour kids aren't in ear shot... and Band-Aids... |
|
| Author: | drmini in aust [ Sat Feb 21, 2015 9:56 am ] |
| Post subject: | Re: changing engine mounts on a minimatic |
I do hope you bought the right mounts, as both Matic ones are different. |
|
| Author: | Garagedefend [ Sat Feb 21, 2015 11:24 pm ] |
| Post subject: | Re: changing engine mounts on a minimatic |
Yes I had to special order them! |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|