| ausmini https://www.ausmini.com/forums/ |
|
| Requiring panel beater NSW https://www.ausmini.com/forums/viewtopic.php?f=2&t=88907 |
Page 1 of 2 |
| Author: | ebbelsian01 [ Wed Mar 18, 2015 4:21 am ] |
| Post subject: | Requiring panel beater NSW |
Hey everyone, after recommendations for a panel beater around Sydney or possibly up central coast way. Private or workshop business I'm not to fussed as long as they've got experience in welding on panels and guards ect. Your help is much appreciated. Kind regards, Ian |
|
| Author: | peterb [ Wed Mar 18, 2015 6:46 am ] |
| Post subject: | Re: Requiring panel beater NSW |
Have you concidered doing it yourself? |
|
| Author: | micool [ Wed Mar 18, 2015 7:08 am ] |
| Post subject: | Re: Requiring panel beater NSW |
JC Racing in botany is very good with minis. ask them to show you photos of the minis they have done. www.jcracing.com.au |
|
| Author: | michaelb [ Wed Mar 18, 2015 7:16 am ] |
| Post subject: | Re: Requiring panel beater NSW |
Hi Ian, What do you need doing? |
|
| Author: | Hobson [ Wed Mar 18, 2015 8:09 am ] |
| Post subject: | Re: Requiring panel beater NSW |
https://www.facebook.com/pages/Gallaghe ... ?ref=br_rs They have done some mini work, not for me, the quality looks great though. |
|
| Author: | doogie [ Wed Mar 18, 2015 10:51 am ] |
| Post subject: | Re: Requiring panel beater NSW |
Canto collision repairs at Wetherill Park, best in NSW, mini expert Doogie |
|
| Author: | danny_ [ Wed Mar 18, 2015 1:49 pm ] |
| Post subject: | Re: Requiring panel beater NSW |
ebbelsian01 wrote: Hey everyone, after recommendations for a panel beater around Sydney or possibly up central coast way. Private or workshop business I'm not to fussed as long as they've got experience in welding on panels and guards ect. Your help is much appreciated. Kind regards, Ian Give canto a call or Danny from chatham smash repairs |
|
| Author: | ebbelsian01 [ Wed Mar 18, 2015 7:10 pm ] |
| Post subject: | Re: Requiring panel beater NSW |
michaelb wrote: Hi Ian, What do you need doing? Hey Michael, I need the new panels welded on, there's also some More floor and rear quarter bottom panel to cut out and replace. I have removed the fenders, front guard, rear bottom panel and RH bottom quarter and some of the floor. I also need to get the large flares and spoiler on. It's a clubby panelvan. Hey Peterb , I've done what I have mentioned above but welding I would rather leave to the experts. I've had a go at straightening out small dings and things. |
|
| Author: | ebbelsian01 [ Wed Mar 18, 2015 7:13 pm ] |
| Post subject: | Re: Requiring panel beater NSW |
doogie wrote: Canto collision repairs at Wetherill Park, best in NSW, mini expert Doogie Hey doogie I think I have heard of him through ausmini I may check him out, from memory I think he sold a panelvan mini drag car year or 2 ago that looked awesome. |
|
| Author: | ebbelsian01 [ Wed Mar 18, 2015 7:35 pm ] |
| Post subject: | Re: Requiring panel beater NSW |
Jig in place, left side still needs to be removed. |
|
| Author: | ebbelsian01 [ Wed Mar 18, 2015 7:41 pm ] |
| Post subject: | Re: Requiring panel beater NSW |
Floor cut to fit. |
|
| Author: | Mick [ Wed Mar 18, 2015 7:45 pm ] |
| Post subject: | Re: Requiring panel beater NSW |
They'll love that you have a rotisserie! That saves a lot of effort. It saved me a few dollars on my last quote by mentioning they could use it while they prepped the shell for the painting. |
|
| Author: | ebbelsian01 [ Wed Mar 18, 2015 9:45 pm ] |
| Post subject: | Re: Requiring panel beater NSW |
Above and below the tail lights I found some bog hiding some dings so I beated them out. The rear panel below I removed because of damage and rust. |
|
| Author: | ebbelsian01 [ Wed Mar 18, 2015 9:56 pm ] |
| Post subject: | Re: Requiring panel beater NSW |
Mick wrote: They'll love that you have a rotisserie! That saves a lot of effort. It saved me a few dollars on my last quote by mentioning they could use it while they prepped the shell for the painting. Yeah my brother made it, works well just needs to be abit more stable for moving around. I guess the more you do yourself the easier and cheaper it will be to get it finished off by a pro. Hopefully it won't cost to much to get it all welded and prepped so it's ready for paint. After that the fun will begin putting it all together! |
|
| Author: | doogie [ Thu Mar 19, 2015 1:39 pm ] |
| Post subject: | Re: Requiring panel beater NSW |
ebbelsian01 wrote: doogie wrote: Canto collision repairs at Wetherill Park, best in NSW, mini expert Doogie Hey doogie I think I have heard of him through ausmini I may check him out, from memory I think he sold a panelvan mini drag car year or 2 ago that looked awesome. Hi, Rocky never had a drag car. Doogie |
|
| Page 1 of 2 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|