ausmini https://www.ausmini.com/forums/ |
|
Car Wrapping https://www.ausmini.com/forums/viewtopic.php?f=2&t=89053 |
Page 1 of 2 |
Author: | slacko [ Fri Apr 03, 2015 8:41 pm ] |
Post subject: | Car Wrapping |
Ok , car wrapping seams to be the trend now days a long with the spray on vinyl removable paints was thinking about changing the appearance of my car wouldn't mind having the roof changed to a different colour rather than painting it I was thinking of having it wrapped and maybe a couple of stipes on the bonnet that way if I don't like it I can take it off with no damage done the problem is WHAT COLOR ? the car is snow white with black trim don't want green , black or burgundy was thinking blue , light or dark ? What is your opinion who can photo shop ![]() PS PINK is not an option |
Author: | ba_dm_tsh [ Fri Apr 03, 2015 9:04 pm ] |
Post subject: | Re: Car Wrapping |
I'd have a good talk to someone who actually does wrapping as I'm thinking the seams and hinges might be a bit of a problem - if not then all good ![]() If you do a YouTube search for "mighty car mods wrap" and check out the job they did on Moogs S2000. I love the blue they used. |
Author: | slacko [ Fri Apr 03, 2015 9:11 pm ] |
Post subject: | Re: Car Wrapping |
ba_dm_tsh only want to do the roof and maybe a stripe on each side of the bonnet would this be a difficult job do you think Mark |
Author: | gtogreen1969 [ Fri Apr 03, 2015 10:17 pm ] |
Post subject: | Re: Car Wrapping |
If you want blue, How about XC Falcon Cobra stripes. http://cdn.silodrome.com/wp-content/upl ... 1_1045.jpg |
Author: | ba_dm_tsh [ Sat Apr 04, 2015 9:31 pm ] |
Post subject: | Re: Car Wrapping |
Hi Mark From what I've seen, the new wraps that 3M are making now are very easy to apply. They even have micro holes to let air bubbles out. You'll need a heat gun to get the wrap to shrink around the edges of the roof just don't get so close that you burn it and don't try to stretch it as you'll change the colour and it will shrink back in the sun. Just make sure you're getting new 3M stock that has "3M Comply" technology which is the air release stuff. For bonnet stripes, again check out MCM on YouTube as they did a pretty good how-to when they put a stripe on the S2000. There are heaps of other vids on YouTube on how to apply wrap too but I like watching the MCM guys. If you're getting a company to wrap it then you should be all good ![]() Make sure you post pics once you're done ![]() Bren |
Author: | Morris 1100 [ Sat Apr 04, 2015 10:16 pm ] |
Post subject: | Re: Car Wrapping |
The only worry I would have is the difference in fade between the covered and uncovered sections. Should be alright on a Snow White car though. |
Author: | slacko [ Sun Apr 05, 2015 7:50 am ] |
Post subject: | Re: Car Wrapping |
Thanks for the replies guys I will look into it and see if there is anyone local that does it Mark |
Author: | bootheman [ Sun Apr 05, 2015 8:36 am ] |
Post subject: | Re: Car Wrapping |
Buy it from alibaba by far the cheapest option. Comes in rolls of 5m+ Make sure is the perforated type; hard to stuff up!!! |
Author: | Mick [ Sun Apr 05, 2015 10:04 am ] |
Post subject: | Re: Car Wrapping |
Very interested in photos! |
Author: | Aussie Brian [ Sun Apr 05, 2015 7:47 pm ] |
Post subject: | Re: Car Wrapping |
You will need to make sure it is a cast film. While the polymeric film is ok for your flat to medium curves cast is the most conformable. As mentioned it must have the air release or you will do your head in trying to get it looking good. After application the film needs to be heat set with a hot air gun this aids in the normalising of the film and setting it in place. Like all things preparation of the surface is paramount. You will find all the information you would need at this site http://www.gamart.com.au/AverySupremeWrappingFilm.aspx |
Author: | cooper19613 [ Sun Apr 05, 2015 11:27 pm ] |
Post subject: | Re: Car Wrapping |
Hey Mark. Talk to Dave King. I saw he posted somewhere recently that he wrapped someones race car |
Author: | frednutz&co [ Mon Apr 06, 2015 7:56 am ] |
Post subject: | Re: Car Wrapping |
PS PINK is not an option there are some nice pinks out there ![]() ![]() |
Author: | willy [ Mon Apr 06, 2015 10:29 am ] |
Post subject: | Re: Car Wrapping |
Attachment: slacko.jpg
|
Author: | Diesel27 [ Mon Apr 06, 2015 10:39 am ] |
Post subject: | Re: Car Wrapping |
I like the rego plate. |
Author: | slacko [ Mon Apr 06, 2015 10:43 am ] |
Post subject: | Re: Car Wrapping |
Thanks willy That's what I am looking for ![]() Mark |
Page 1 of 2 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |