Good idea! Thanks
Threw it up so those at home can see.
Similar to a clubby block it seems.
| ausmini https://www.ausmini.com/forums/ |
|
| Rover A+ 998 block https://www.ausmini.com/forums/viewtopic.php?f=2&t=89071 |
Page 1 of 1 |
| Author: | aaron [ Sun Apr 05, 2015 6:52 pm ] |
| Post subject: | Rover A+ 998 block |
Does anyone by chance have a photo or could take a photo of a rover A+ 998 block. Specifically the top of the block (no head) So the hole configuration is shown. Cheers Aaron |
|
| Author: | Harley [ Sun Apr 05, 2015 6:58 pm ] |
| Post subject: | Re: Rover A+ 998 block |
I don't have one but go to ebay uk and search for 'mini 998 block' - might find something there? |
|
| Author: | aaron [ Sun Apr 05, 2015 8:19 pm ] |
| Post subject: | Re: Rover A+ 998 block |
Good idea! Thanks Threw it up so those at home can see. Similar to a clubby block it seems. |
|
| Author: | Harley [ Sun Apr 05, 2015 8:28 pm ] |
| Post subject: | Re: Rover A+ 998 block |
Isn't that an early block? |
|
| Author: | drmini in aust [ Sun Apr 05, 2015 8:33 pm ] |
| Post subject: | Re: Rover A+ 998 block |
Bracket lugs for alternator tail end are in the A+ position, otherwise looks to me like a Clubby 998 block, side covers and all. All 998A+ have side covers. |
|
| Author: | aaron [ Sun Apr 05, 2015 8:33 pm ] |
| Post subject: | Re: Rover A+ 998 block |
http://www.ebay.co.uk/itm/Classic-Mini- ... 35e7b1887d A+ going by the webbing |
|
| Author: | KLAS [ Mon Apr 06, 2015 3:30 am ] |
| Post subject: | Re: Rover A+ 998 block |
99HA06P is a 1984 A+ with 10.3:1 compression |
|
| Author: | winabbey [ Mon Apr 06, 2015 12:53 pm ] |
| Post subject: | Re: Rover A+ 998 block |
KLAS - PM sent. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|