| ausmini https://www.ausmini.com/forums/ |
|
| Door Opener and Windor Winder Thread https://www.ausmini.com/forums/viewtopic.php?f=2&t=89086 |
Page 1 of 1 |
| Author: | Hanra [ Tue Apr 07, 2015 11:45 am ] |
| Post subject: | Door Opener and Windor Winder Thread |
Australian doors. What is the thread size/type for the screw the retains the door opener and window winder?? Cheers, |
|
| Author: | Hanra [ Tue Apr 07, 2015 8:39 pm ] |
| Post subject: | Re: Door Opener and Windor Winder Thread |
How's 10-32 UNF sound? |
|
| Author: | Scoop [ Tue Apr 07, 2015 8:54 pm ] |
| Post subject: | Re: Door Opener and Windor Winder Thread |
10/32 is 5/16! So 5/16 UNF. edit 5/16 is approx 8mm so not near what your after |
|
| Author: | Harley [ Tue Apr 07, 2015 9:58 pm ] |
| Post subject: | Re: Door Opener and Windor Winder Thread |
#10 is correct Hanra for the handle screws. I used button head socket screws on mine instead of phillips - heaps easier to put in and don't strip out as easy. |
|
| Author: | Timbo [ Wed Apr 08, 2015 5:42 pm ] |
| Post subject: | Re: Door Opener and Windor Winder Thread |
10-32 is not the same as 10/32. When you get to the small end of UNF for some weird reason they change the designation. 10-32 indicates that is a #10 screw with 32 threads per inch. Its the same as 3/16". Tim |
|
| Author: | Hanra [ Wed Apr 08, 2015 8:40 pm ] |
| Post subject: | Re: Door Opener and Windor Winder Thread |
Yep. Bought a 10-32 (3/16) and it fits no worries. Radical. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|