It will be light as long as you don't back off the throttle
| ausmini https://www.ausmini.com/forums/ |
|
| Castor angle for LSD https://www.ausmini.com/forums/viewtopic.php?f=2&t=89199 |
Page 1 of 1 |
| Author: | gtogreen1969 [ Sat Apr 18, 2015 7:01 pm ] |
| Post subject: | Castor angle for LSD |
I will be setting up my steering soon. Does anyone know if the castor angle should be changed when running a LSD. I was going to start off with 5deg and see how it goes. |
|
| Author: | Kennomini [ Sun Apr 19, 2015 9:38 am ] |
| Post subject: | Re: Castor angle for LSD |
Out of curiousity dose the type of LSD matter in this topic? |
|
| Author: | gtogreen1969 [ Sun Apr 19, 2015 7:12 pm ] |
| Post subject: | Re: Castor angle for LSD |
Kennomini wrote: Out of curiousity dose the type of LSD matter in this topic? Not sure. A heavier preload LSD is heavier to steer. But i dont know if you need to change the castor angle to counteract any steering heaviness. I don't have much info on my diff. I found a scrap of paper in the pile of receipts that came with the car. It has "LSD 80psi" scribbled down on it. So i am assuming it is an 80psi preload Salisbury LSD. |
|
| Author: | HistoricRacingS [ Sun Apr 19, 2015 9:25 pm ] |
| Post subject: | Re: Castor angle for LSD |
It will be light as long as you don't back off the throttle
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|