ausmini
https://www.ausmini.com/forums/

Boot lid
https://www.ausmini.com/forums/viewtopic.php?f=2&t=89340		 Page 1 of 2
Author:  BL-235-MC [ Sun May 03, 2015 6:23 am ]
Post subject:  Boot lid
hello, i want to say what's the size for plate in boot lid ?
i have buy a Austalian boot lid and i have a european plate.
i will cut the plate for put in the boot lid.
thank
Image
Author:  BL-235-MC [ Sun May 03, 2015 6:24 am ]
Post subject:  Re: Boot lid
size in cm, please.
Author:  peterb [ Sun May 03, 2015 7:05 am ]
Post subject:  Re: Boot lid
I can get the measurement for you ,; do you need the overall size of plate holder or just number plate?
Author:  BL-235-MC [ Sun May 03, 2015 7:49 am ]
Post subject:  Re: Boot lid
hello, the overall size of plate holder.

the euroepan size is big for big number plate

Image
Author:  BL-235-MC [ Sun May 03, 2015 8:03 am ]
Post subject:  Re: Boot lid
i have this :
Image
cut for have australian, or find one in small price.
Author:  Scoop [ Sun May 03, 2015 9:09 am ]
Post subject:  Re: Boot lid
39.7cm over all.
There is a small step on it and that measures 38cm wide.
Author:  peterb [ Sun May 03, 2015 9:51 am ]
Post subject:  Re: Boot lid
Maybe some one here could just post you an Aussie one.
Author:  Goldbrocade_62 [ Sun May 03, 2015 10:06 am ]
Post subject:  Re: Boot lid
Not only are they longer also wider too
Author:  simon k [ Sun May 03, 2015 11:48 am ]
Post subject:  Re: Boot lid
if you give us the size of the european plate we could make one from paper and take a picture of it on a boot lid - would that help?
Author:  1071 S [ Sun May 03, 2015 12:28 pm ]
Post subject:  Re: Boot lid
Not obvious what you are trying to do.

However, an early UK Mk I boot lid is exactly the same as an early Aus bootlid. (And would fit your GT - if indeed its yours and that's what you are trying to do...)

In *about* 1965 Australia moved to the smaller boot lid flap plate that matches our number plates ...and which is shown in your photo of the GT.

Cheers, Ian
Author:  Scoop [ Sun May 03, 2015 12:38 pm ]
Post subject:  Re: Boot lid
1071 S wrote:
Not obvious what you are trying to do.

However, an early UK Mk I boot lid is exactly the same as an early Aus bootlid. (And would fit your GT - if indeed its yours and that's what you are trying to do...)

In *about* 1965 Australia moved to the smaller boot lid flap plate that matches our number plates ...and which is shown in your photo of the GT.

Cheers, Ian

I think he just pinched the picture from Micool's build thread as a reference. So its not his GT
Author:  Morris 1100 [ Sun May 03, 2015 1:56 pm ]
Post subject:  Re: Boot lid
Image

Image

Image

Image
Author:  Phil 850 [ Sun May 03, 2015 9:36 pm ]
Post subject:  Re: Boot lid
We'll interpreted Morris 1100.
I sent Arnaud an Australian boot lid with narrow flap as he is building an Australian Mini which will be a bit unique in France. He probably hasn't received my boot lid yet. It was estimated at 60~90 day delivery by sea to France.
Author:  BL-235-MC [ Sun May 03, 2015 9:58 pm ]
Post subject:  Re: Boot lid
ok, thanks for this.
i wait the boot lid and if is difficult to transform, i buy a original.
i will search in eBay.
gumtree australia, i don't have answer when i post a question.
Author:  BL-235-MC [ Sun May 03, 2015 10:01 pm ]
Post subject:  Re: Boot lid
one another question, i possible to have a black number plate ? with my number ?
Page 1 of 2 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/