| ausmini https://www.ausmini.com/forums/ |
|
| 850 Distributor Number? https://www.ausmini.com/forums/viewtopic.php?f=2&t=89368 |
Page 1 of 1 |
| Author: | Scoop [ Tue May 05, 2015 8:01 pm ] |
| Post subject: | 850 Distributor Number? |
Hi guys, Could anyone help me out with the correct distributor number for a late 64 Morris 850? I would like to rebuild one ready for my van and want it to be period correct. I have 20 or 30 to pick from so hopefully I have one close. Thanks Scoop |
|
| Author: | drmini in aust [ Tue May 05, 2015 8:07 pm ] |
| Post subject: | Re: 850 Distributor Number? |
My InterEurope manual (Oz supplement) says- 850, Early model HC, Lucas DM2, 40768A Early model LC, Lucas DM2, 40707D Late model HC, Lucas 25D4, 40941 Late model LC, Lucas 29D4, 62941051A I have advance specs for all these if you want. |
|
| Author: | Scoop [ Tue May 05, 2015 8:13 pm ] |
| Post subject: | Re: 850 Distributor Number? |
Thanks Doc. Never heard of Lucas DM2. Is that there real early cast steel one? |
|
| Author: | drmini in aust [ Tue May 05, 2015 8:14 pm ] |
| Post subject: | Re: 850 Distributor Number? |
DM2 is the early cast alloy D shaped one. |
|
| Author: | Scoop [ Tue May 05, 2015 8:20 pm ] |
| Post subject: | Re: 850 Distributor Number? |
Thanks again Doc. I think a 25d4 40941 will be on the cards then. Next, how much earlier would the date stamped on it be? Wiper motor is 10/64, would it be similar to that? |
|
| Author: | drmini in aust [ Tue May 05, 2015 8:24 pm ] |
| Post subject: | Re: 850 Distributor Number? |
Sounds reasonable. They were both bought-in local parts. |
|
| Author: | Scoop [ Tue May 05, 2015 8:34 pm ] |
| Post subject: | Re: 850 Distributor Number? |
Cheers. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|