ausmini
https://www.ausmini.com/forums/

wheel nuts
https://www.ausmini.com/forums/viewtopic.php?f=2&t=8951		 Page 1 of 2
Author:  68matic [ Sun Jul 10, 2005 5:26 pm ]
Post subject:  wheel nuts
me gots these today off doogs thanks for the deal was looking for moke wheels
other than niceproducts.com.au, can anyone suggest other places where i can gets meself some nuts (and washers) for these?
cheers friends

Image
Author:  czerial [ Sun Jul 10, 2005 5:47 pm ]
Post subject: 
I hate to sound negative on this

I hope they arent the wheels i sold to him

(13" hotwires) I sold them to him for the tyres. they are NOT the
right offset for a mini and bend the studs to get them to fit which
is not safe. hope they werent passed off to you as mini wheels......
Author:  68matic [ Sun Jul 10, 2005 10:08 pm ]
Post subject: 
they were passed off as moke wheels :lol:
Author:  drmini in aust [ Sun Jul 10, 2005 10:42 pm ]
Post subject: 
If 100mm PCD, I wouldn't use them without modifying to 101.6mm (4") PCD. I have seen wheel studs break because of this.... :cry:
Author:  68matic [ Sun Jul 10, 2005 10:57 pm ]
Post subject: 
im getting the nut suppliers to check the
holes on the wheel
with
a stud impression i made on paper (parents dont wanna go mokin' tomorrow :roll: )

and will ask them nicely if they can do something about it.
if not possible then ill take the rubber off (still good) and slap them on steelies

cheers
Author:  czerial [ Sun Jul 10, 2005 11:04 pm ]
Post subject: 
thats why i got rid of them. didnt want to risk that on any of my
cars.

It was clearly known when i sold them they are not suitable for
a mini without mods. Its ashame they got passeed of as such Duc.
glad the tyres are good though
Author:  doogie [ Mon Jul 11, 2005 12:08 pm ]
Post subject: 
I bolted the wheels up to a mini brake discs with no problem, they all fitted nice and snug with no stress on the studs. Chris i belive you may have been given the wrond info on the wheels, they will fit a Moke no drama's at all.

Doogie
Author:  FatMaserati [ Mon Jul 11, 2005 1:44 pm ]
Post subject: 
Mmm... Get them measured, just to be safe. It's better than dying.
Author:  68matic [ Mon Jul 11, 2005 4:52 pm ]
Post subject: 
will do
thanks for the heads up boys
Author:  willy [ Mon Jul 11, 2005 4:56 pm ]
Post subject: 
FatMaserati wrote:
It's better than dying.

Well... it depends if he WANTS to die doesnt it? :lol:
Author:  Lillee [ Mon Jul 11, 2005 5:18 pm ]
Post subject: 
FatMaserati wrote:
It's better than dying.
:lol: Good point :lol:
Author:  68matic [ Mon Jul 11, 2005 7:08 pm ]
Post subject: 
went to niceproducts in marrickville
said they didnt have any nuts for the wheels
(they supply repco and supercheap)
nothing.


option 1. get some custom made(no need for attractiveness. just purpose). how much $$ do you think it will cost?

option 2. take the tyres off (i want them) and ebay the rims. slap the 165 and 185's on steels

any other options?
Author:  IwannaMini [ Mon Jul 11, 2005 9:17 pm ]
Post subject: 
Ask baracade ... he had/has exactly the same wheels. Maybe he has nuts still

**note please dont start with the nuts jokes please**
Author:  Angusdog [ Mon Jul 11, 2005 9:26 pm ]
Post subject: 
A guy walks into his Doctor's office with shrink wrap around his middle.





The doc says "Well, I can clearly see your nuts"
Author:  Angusdog [ Mon Jul 11, 2005 9:27 pm ]
Post subject: 
A guy walks into a bar with a steering wheel coming out of the front of his pants.
Barman says "Hey, pal - do you know you've got a steering wheel coming out of your pants?'





Guy replies "I know, it's driving me nuts"
Page 1 of 2 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/