ausmini https://www.ausmini.com/forums/ |
|
School me on all these parts? https://www.ausmini.com/forums/viewtopic.php?f=2&t=89642 |
Page 1 of 7 |
Author: | Bubbacluby [ Sat Jun 06, 2015 8:26 pm ] |
Post subject: | Re: School me on all these parts? |
You did well with all those parts, cool looking mini too. 2a is an under-bonnet fresh-air heater fitted to mini matics (round nose mini's) |
Author: | Morris 1100 [ Sat Jun 06, 2015 10:16 pm ] |
Post subject: | Re: School me on all these parts? |
1A is an AWA Diamond Dot radio from the 60s. 2A is like Bubba says, a Matic/Deluxe fresh air heater. 2B looks familiar, it might be an accessory heater for a truck. Do you have a photo of the other side? |
Author: | Goldbrocade_62 [ Sun Jun 07, 2015 7:51 am ] |
Post subject: | Re: School me on all these parts? |
2B I think goes under the dash there is a slide door on them I have one somewhere in my shed it came out a 69k just can't quite remember whether it had something to do with the demister box on the drivers side as well not sure if the standard or a option etc |
Author: | MiniKado [ Sun Jun 07, 2015 9:14 am ] |
Post subject: | Re: School me on all these parts? |
Thanks Bubbacluby, Morris 1100 & Goldbrocade. That's great! |
Author: | Morris 1100 [ Sun Jun 07, 2015 11:05 am ] |
Post subject: | Re: School me on all these parts? |
Kind of helps, see it doesn't have a fan, it need to be mounted over an air vent to provide flow. Minis don't have vents! |
Author: | Davo111 [ Sun Jun 07, 2015 12:43 pm ] |
Post subject: | Re: School me on all these parts? |
![]() ram air heaters were definately an expensive extra, here is the proof. ![]() I think it was about $45 fitted as the optionable extra, in 1969. |
Author: | 1071 S [ Sun Jun 07, 2015 1:24 pm ] |
Post subject: | Re: School me on all these parts? |
2A was also used on 850s. Cheers, Ian |
Author: | MiniKado [ Sun Jun 07, 2015 2:01 pm ] |
Post subject: | Re: School me on all these parts? |
Thanks again Morris 1100 plus Davo111 & 1071 S. I'll post a couple more for this arvo. |
Author: | Mick [ Sun Jun 07, 2015 4:01 pm ] |
Post subject: | Re: School me on all these parts? |
3a Tie rod rubbers (Front suspension) plus associate washers and nuts 4a Yes, Moke guards, but nut sure about the fitting dates and models...sorry 5a Clubman fresh air intake, fitted to the drivers inner guard to take air in from behind the grill then through a flexible duct to the cabin for the heater 6a Moke seat cushions |
Author: | TheMiniMan [ Sun Jun 07, 2015 4:43 pm ] |
Post subject: | Re: School me on all these parts? |
5A,,, duckting for air to scoop from under the bonnet , fits into drivers side inner mudguard, to then fit conssetina tubing to go through the back end of the inner guard, 90deg into the car cabin then onto anothe rpiece of conssetina tubing & then onto the heater in clubby & Leyland minis |
Author: | MiniKado [ Mon Jun 08, 2015 9:01 am ] |
Post subject: | Re: School me on all these parts? |
Thanks Mick and TheMiniMan |
Page 1 of 7 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |