ausmini
https://www.ausmini.com/forums/

1979 Aussie mini
https://www.ausmini.com/forums/viewtopic.php?f=2&t=89698		 Page 1 of 4
Author:  Dubguy [ Fri Jun 12, 2015 2:54 pm ]
Post subject:  1979 Aussie mini
Anyone here own one? Looking for some details as to what they had and hadn't got installed in 1979
Author:  Dubguy [ Fri Jun 12, 2015 3:04 pm ]
Post subject:  Re: 1979 Aussie mini
Specifically, did they have wing mounted indicators? Rear seat belts? Child restraint points? Side intrusion bars in the doors
Author:  phillb [ Fri Jun 12, 2015 3:50 pm ]
Post subject:  Re: 1979 Aussie mini
Australian production ended in 1978. They did have rear lap/sash belts but not inertia/retractable, pretty sure they had child anchor points. No wing indicators. I don't think they had any intrusion bars in the doors.
Author:  Dubguy [ Fri Jun 12, 2015 6:40 pm ]
Post subject:  Re: 1979 Aussie mini
Thanks for that, well if they weren't so roduced here in 1979, obviously imports were sold. What did they have. Is there documentation? This has obviously come about from my mini compliance of a 1979 Irish import roundnose. Even though the adr says cars had certain things did minis really? Is there a more accurate piece of paperwork to work off?
Author:  Morris 1100 [ Fri Jun 12, 2015 6:53 pm ]
Post subject:  Re: 1979 Aussie mini
They didn't sell new Minis in Australia after 1978. All Minis after that were imported privately or imported used.
Author:  Dubguy [ Fri Jun 12, 2015 7:02 pm ]
Post subject:  Re: 1979 Aussie mini
Ok! Well I'm lost then!! The other thing they brought up was a handbrake warning light! Any mini owners have one?!
Oh and my 6x10 revolutions stick past the arches. I know I can stick normal wheels on to get compliance, but is it a thing cops hate , and what is the penalty?
Author:  Goldbrocade_62 [ Fri Jun 12, 2015 7:08 pm ]
Post subject:  Re: 1979 Aussie mini
Morris 1100 wrote:
They didn't sell new Minis in Australia after 1978. All Minis after that were imported privately or imported used.

Would they have been cars they couldn't sell in 78 carried over to 79

In 79 I would've been 5 and I can't quite remember :lol:
Author:  Morris 1100 [ Fri Jun 12, 2015 7:10 pm ]
Post subject:  Re: 1979 Aussie mini
Handbrake warning light was fitted to all locally made Minis from around the start of 77.
It was also fitted to Police spec cars from about 1969.
Not hard to do, it is just a door light switch mounted on a bracket on the handbrake.
Author:  Dubguy [ Fri Jun 12, 2015 7:21 pm ]
Post subject:  Re: 1979 Aussie mini
Where is the lamp fitted?
Author:  Bubbacluby [ Fri Jun 12, 2015 8:00 pm ]
Post subject:  Re: 1979 Aussie mini
I'm sure I have seen posts here or Ebay of 1979 car's (very very few)

But maybe as Gold Brocade said carried over into 79. The only answer as the last one made is a 78.

I know 78 was the last yr of domestic production of minis.

Could be totally wrong but just seems familiar
Author:  simon k [ Fri Jun 12, 2015 8:41 pm ]
Post subject:  Re: 1979 Aussie mini
Dubguy wrote:
Thanks for that, well if they weren't so roduced here in 1979, obviously imports were sold.


just to make something really clear for you, Morris, Austin, BMC, Leyland, Rover or otherwise NEVER sold Minis in Australia that weren't BUILT in Australia at one of the factories in Sydney
Author:  Dubguy [ Sat Jun 13, 2015 3:22 pm ]
Post subject:  Re: 1979 Aussie mini
Has anyone strengthened there doors?
Author:  1071 S [ Sat Jun 13, 2015 5:39 pm ]
Post subject:  Re: 1979 Aussie mini
Project Binky ??? I think he does the door bars in Episode 9.

Cheers, Ian
Author:  timmy201 [ Sat Jun 13, 2015 9:14 pm ]
Post subject:  Re: 1979 Aussie mini
All the imported Rover minis should have side intrusion bars done for compliance?
Author:  Dubguy [ Sat Jun 13, 2015 9:58 pm ]
Post subject:  Re: 1979 Aussie mini
I'm just wondering if someone has done it and would be keen to do again, for cheaper than what I've been quoted!!
Page 1 of 4 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/