i have some new rear S Drums with the 1 inch step on them i was just wondering if anyone has any tips on fitting them. i know i need longer studs and set screws. does anyone have any tips on knockin the studs out. i'm Fiiting them because i have discs and i need to even out the front and rear track.

_________________
FOR SALE MInidlx, 1293, GR head, RE-13, GR worked Redline Manifold, 45 mm DCOE,pulsar dizzy , "S" Disc's, Mk II "S" box, 3.65 diff. Minator 10X6's On the loose

I sit the flange on the vice, hit stud with BFH...
You can fit the new ones the same way (oil them first) or press them in with a press, or use the vice and a couple of sockets.
Or, wind a wheel nut on the stud, with some washers underneath it.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.