Yer it is he sc12 kit the Ben makes still organizing it off him atm so a if I use a std carb I will have issues looks like I am on the look out for a hiff carb any 1 have one
| ausmini https://www.ausmini.com/forums/ |
|
| which carb https://www.ausmini.com/forums/viewtopic.php?f=2&t=90012 |
Page 1 of 1 |
| Author: | i got a mini [ Mon Jul 20, 2015 5:42 pm ] |
| Post subject: | which carb |
was talking to a old mini guy he recons he used a std carb 1.5 inch on a super charger I thought they had to be a sealed carb like a hiff 44 is this true or it doesn't matter if they are a suck thru setup |
|
| Author: | Morris 1100 [ Mon Jul 20, 2015 6:15 pm ] |
| Post subject: | Re: which carb |
It doesn't matter with a suck through. |
|
| Author: | i got a mini [ Mon Jul 20, 2015 6:24 pm ] |
| Post subject: | Re: which carb |
Thank u very much |
|
| Author: | mini_mad_matt [ Mon Jul 20, 2015 6:30 pm ] |
| Post subject: | Re: which carb |
If it's the sc12 kit you will be wanting a HIF carb though because of the internal float. Doesn't need to be a sealed one though. You may be able to use a HS4/6 but the float bowl hanging off the side will create issues which aren't easily worked around. |
|
| Author: | i got a mini [ Mon Jul 20, 2015 6:41 pm ] |
| Post subject: | Re: which carb |
Yer it is he sc12 kit the Ben makes still organizing it off him atm so a if I use a std carb I will have issues looks like I am on the look out for a hiff carb any 1 have one
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|