| ausmini https://www.ausmini.com/forums/ |
|
| Guess my cam - 0.315" lobe lift https://www.ausmini.com/forums/viewtopic.php?f=2&t=90085 |
Page 1 of 1 |
| Author: | gtogreen1969 [ Mon Jul 27, 2015 10:30 pm ] |
| Post subject: | Guess my cam - 0.315" lobe lift |
Here is one for the brains trust. Can you guess what my camshaft is by the lobe lift only? I have just measured my lobe lift on my 1330 and I got a mixture of 7.99 - 8mm on both the inlets and exhausts. This would make it a 0.315" lobe lift on both. Thanks in advance Brad |
|
| Author: | 36 [ Mon Jul 27, 2015 11:07 pm ] |
| Post subject: | Re: Guess my cam - 0.315" lobe lift |
It could only be a wild guess - lobe lift is only one part of a cam shafts spec. You've also got the timing of when the valves open and close -that's kinda important. |
|
| Author: | gtogreen1969 [ Mon Jul 27, 2015 11:43 pm ] |
| Post subject: | Re: Guess my cam - 0.315" lobe lift |
I didn't want to pull half the motor apart just for the fun of it. I have found a few on the google thingy with 8mm lift. Kent 544/643(Fast road), C-aeg-597 and C-aea-595 (Super sprints), Kent 290 sp (Race) Because my car idles fairly smoothly I would say my car has the Kent 544. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|