ausmini https://www.ausmini.com/forums/ |
|
GOT Brakes !!! and some tasty shiny piccies ^_^ https://www.ausmini.com/forums/viewtopic.php?f=2&t=9019 |
Page 1 of 2 |
Author: | Namibian CAMEL [ Tue Jul 12, 2005 5:51 pm ] |
Post subject: | GOT Brakes !!! and some tasty shiny piccies ^_^ |
Okkher so tell me hows much you would expect to pay for one to be reconditioned and installed and the system bled and done up whatever. I gots me a quote for 270 bucks all installed and fine today. So ive got to consider that - or just drive around with only a handbrake? Is that a fair price? Cause im sure it wont get much better? A bloke rang up for me and said a brand new one would be abot $470 so i said go away |
Author: | FIGJAM [ Tue Jul 12, 2005 6:17 pm ] |
Post subject: | |
Camel, that car of yours should nearly be new. ![]() |
Author: | Namibian CAMEL [ Tue Jul 12, 2005 6:20 pm ] |
Post subject: | |
FIGJAM wrote: Camel, that car of yours should nearly be new.
![]() ![]() hmm i dont understand this statement? ![]() maybe , no the other one ![]() ![]() |
Author: | Maxi23 [ Tue Jul 12, 2005 6:45 pm ] |
Post subject: | |
I was enquiring about one today. They said about 140 or so for just the cylinder. So an extra $100 may b worth it for you to pay someone else to do it for you if u cbf doing it all ureself. |
Author: | Dylans Clubby [ Tue Jul 12, 2005 7:21 pm ] |
Post subject: | |
i got quoted about $200 to re-sleeve the master cyl, not sure about instal and bleed etc |
Author: | J_A_M [ Tue Jul 12, 2005 10:39 pm ] |
Post subject: | |
I paid $105 for a new brake master cylinder....can be a biach to fit....especially those damn clevis pins ![]() |
Author: | aaron [ Tue Jul 12, 2005 10:43 pm ] |
Post subject: | |
It didn't take me that long to put them in for you mate ![]() I did mine on Sunday too! Easy! Just need the right tools! Cheers Aaron |
Author: | J_A_M [ Tue Jul 12, 2005 10:53 pm ] |
Post subject: | |
oh yea...thatpart was piss easy (for me ![]() ![]() |
Author: | Namibian CAMEL [ Wed Jul 13, 2005 8:56 pm ] |
Post subject: | |
bugger it, its going in on monday for a tuesday start, and with a bit of luck il have it back friday? the only trouble is getting there? it better not rain ![]() ![]() but probably its just like a bike, they dont go much more than 50 kays they arent big, and can get of the road, and im not big and i can too, and the brake capabilities are maybe the same so ill have a go and hope they can give it a fix, and i can have brakes again ![]() |
Author: | Namibian CAMEL [ Sun Jul 17, 2005 10:29 pm ] |
Post subject: | |
![]() yay tomorrow i gets me to drive to work and then drop off in the arvo teh mini for its brake job ![]() and with a bit of luck the job will work and ill have some brakes again ![]() i am going to leave for work 15 mins earlier just so i can nurse it ( ME ![]() ![]() and it had better not rain cause otherwise im well cheesecaked ![]() wish me luck and something bye |
Author: | =twista= [ Sun Jul 17, 2005 11:19 pm ] |
Post subject: | |
hope all goes well my lama friend ![]() so we can go cruisin. |
Author: | poeee [ Mon Jul 18, 2005 10:02 am ] |
Post subject: | |
Dylan's Clubby wrote: i got quoted about $200 to re-sleeve the master cyl, not sure about instal and bleed etc
Yours is the twin system brake master cylinder though... not those easy to get single ones! |
Author: | Namibian CAMEL [ Mon Jul 18, 2005 10:13 pm ] |
Post subject: | |
okkher so i made it all safe ![]() yep you can come cruising now ![]() where would you like to go ![]() Just thinking back, ive had mini for over 18 months, and for so long it was my only car, and i used to drive it everyday, for about 2-3 months? Its unbelievable to me now, i cant even remember back to Dec, Jan and going out and hopping into the mini every morning ![]() ![]() ![]() Its such a strange thought now, but its also such a monster, and with brakes it gives you so much freedom, and allows you to 'do' things, rather than not, so restricting. but that is all, unbelievable is the mini ![]() ![]() ![]() ![]() goodnight ![]() |
Author: | Namibian CAMEL [ Tue Jul 19, 2005 6:23 pm ] |
Post subject: | |
So i go in there this arvo cause i need to get a torch that i use when i drive the mini ![]() so i go in there and then i ask about my othe rproblems, said i should have asked before , but now i am getting me my ball joint fixed, and a wheel alignment. So that will be fun Paying a real high price?? but who cares ![]() ![]() ![]() but it should all be ready sometime on thursday , which was a quick go. the list Recond Master cyl, install bleed adjust, Lower ball joint and wheel alignment? hmm not a big list about 420 dorra?? ![]() |
Author: | Namibian CAMEL [ Fri Jul 22, 2005 9:18 pm ] |
Post subject: | |
right so here is the oldie ( i mean in the old state, it just got reconditioned? new sleeve? wahtever that is ![]() ![]() ![]() ![]() WHAM ![]() gee that was filthy i cant believe it ![]() ![]() ![]() but ![]() ![]() ![]() ![]() UNBELIEVABLE ![]() ![]() hmm maybe that one next to it needs a go too but here is the bill ![]() hmmm 2.5 hours ![]() ![]() ![]() ![]() But in the end they didnt need to do a wheel align so that saved about 120 bucks so that was a pleasant suprise when i picked it up today. But YAY they work The bloke said all they could get was half a pedal?? but i suppose thats alright? and apparently the rego inspector guys who looked at my mini to test for roadworthy, they said it would fail cause the brake lights no work. so i was wary of that and had only had a few drive with no lights BUT? here me thinks no lights. i even today after picking up mini ask a bloke at the servo if i had lights and no i didnt. BUT when i reverse into the shed today, back up to wood, there is brake light glow. the brake lights only work when car is on, and the rego blokes didnt know that. Yet they would fail me for it ![]() but that was strange Good happy crusing again for me brakes really give you so much more freedom while driving, its unbelievable also. Driving with no brakes is so very restricting and annoying, ![]() |
Page 1 of 2 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |