Hi everyone, I am refurbing my brake system at the moment and the brake master cylinder was free but had little fluid in it (is getting a kit through it). aajust wondering do I need to do anything with this valve , car had been stored for 20 yrs untouched. Had fluid come out hoses at wheel cylinders when I undid them, is this an item that fails internally if nt used?
Cheers,
Steve

oops PWDA valve!!

This link may help.
http://www.minimania.com/msgThread/1129 ... iter_valve

I believe John Smidt used to rebuild them, probably still can arrange it.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.

Thanks for that, will see if system works with new master cylinder and wheel cylinders, if not I know what will need doing
Cheers,
Steve