Thanks for that, will see if system works with new master cylinder and wheel cylinders, if not I know what will need doing
Cheers,
Steve
| ausmini https://www.ausmini.com/forums/ |
|
| PDWA valve https://www.ausmini.com/forums/viewtopic.php?f=2&t=90278 |
Page 1 of 1 |
| Author: | mooman10_0 [ Tue Aug 18, 2015 6:49 pm ] |
| Post subject: | PDWA valve |
Hi everyone, I am refurbing my brake system at the moment and the brake master cylinder was free but had little fluid in it (is getting a kit through it). aajust wondering do I need to do anything with this valve , car had been stored for 20 yrs untouched. Had fluid come out hoses at wheel cylinders when I undid them, is this an item that fails internally if nt used? Cheers, Steve |
|
| Author: | mooman10_0 [ Tue Aug 18, 2015 7:42 pm ] |
| Post subject: | Re: PDWA valve |
oops PWDA valve!! |
|
| Author: | drmini in aust [ Tue Aug 18, 2015 10:52 pm ] |
| Post subject: | Re: PDWA valve |
This link may help. http://www.minimania.com/msgThread/1129 ... iter_valve I believe John Smidt used to rebuild them, probably still can arrange it. |
|
| Author: | mooman10_0 [ Wed Aug 19, 2015 5:24 am ] |
| Post subject: | Re: PDWA valve |
Thanks for that, will see if system works with new master cylinder and wheel cylinders, if not I know what will need doing Cheers, Steve |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|