| ausmini https://www.ausmini.com/forums/ |
|
| Engine ID https://www.ausmini.com/forums/viewtopic.php?f=2&t=90328 |
Page 1 of 1 |
| Author: | milano [ Sun Aug 23, 2015 5:18 pm ] |
| Post subject: | Engine ID |
Not shore what I have , motor I D. No 10018864 with head 24A2 the other a little more interesting, N682918P with a 12G940G head and on the side of block the original 1275 plate this head does not have the extra stud holes. what exactly do we have here, this motor has the thick casting flange for the sump & no plates for cam follows. Help wanted, Please Milano. |
|
| Author: | gtogreen1969 [ Sun Aug 23, 2015 6:00 pm ] |
| Post subject: | Re: MK2 Cooper s Questions |
milano wrote: Not shore what I have , motor I D. No 10018864 with head 24A2 the other a little more interesting, N682918P with a 12G940G head and on the side of block the original 1275 plate this head does not have the extra stud holes. what exactly do we have here, this motor has the thick casting flange for the sump & no plates for cam follows. Help wanted, Please Milano. Hi Milano The N682918P is a non Cooper S 1275 that had an engine number re-issued by the NSW police back in 1968. The 10018864 is an 1100cc from an early Clubman. |
|
| Author: | simon k [ Sun Aug 23, 2015 6:31 pm ] |
| Post subject: | Re: Engine ID |
fixed... Milano, when you have a new question, make sure you click the "New Topic" button, not "Reply" |
|
| Author: | milano [ Sun Aug 23, 2015 8:08 pm ] |
| Post subject: | Re: Engine ID |
To GTO Green thank you. Simon K still learning, Thanks. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|