How many different sizes of spacer are available for mechanical fuel pumps?
I got a new pump (SU brand) and I don't want to put the wrong spacer on the block
| ausmini https://www.ausmini.com/forums/ |
|
| Fuel pump spacers https://www.ausmini.com/forums/viewtopic.php?f=2&t=9037 |
Page 1 of 1 |
| Author: | J_A_M [ Wed Jul 13, 2005 9:35 am ] |
| Post subject: | Fuel pump spacers |
How many different sizes of spacer are available for mechanical fuel pumps? I got a new pump (SU brand) and I don't want to put the wrong spacer on the block
|
|
| Author: | drmini in aust [ Wed Jul 13, 2005 7:31 pm ] |
| Post subject: | |
There are 2- a thick one (10?mm) and a thin one (~5mm). Didn't it come with one? 
If it's the same as Pops' I think it takes the thin one... 
|
|
| Author: | Morris 1100 [ Wed Jul 13, 2005 7:37 pm ] |
| Post subject: | |
I think the Goss pump uses the thin one and the SU pump uses the thick one. |
|
| Author: | J_A_M [ Thu Jul 14, 2005 8:27 am ] |
| Post subject: | |
cool 
I bought a new SU pump. It had a note to use a spacer.....just wanted to make sure I used THE RIGHT spacer. I contacted the seller and was set straight.
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|