green63 wrote:
these are solidworks files i got them from grabcab.com they may have some autocad files as well.
not solidworks, 3d studio max
| ausmini https://www.ausmini.com/forums/ |
|
| Mini CAD Drawing (DXF?) https://www.ausmini.com/forums/viewtopic.php?f=2&t=90474 |
Page 1 of 2 |
| Author: | d1ck0 [ Mon Sep 07, 2015 8:34 pm ] |
| Post subject: | Mini CAD Drawing (DXF?) |
Many moons ago I recall getting a Mini Drawn up in CAD (pretty sure it was an AutoCAD DXF file) which had several Layers and you could isolate components. Does anyone still have a copy of this file? I've been through my Computers and HDD's and can't find it anywhere. Thanks in anticipation. |
|
| Author: | looopy [ Tue Sep 08, 2015 8:16 am ] |
| Post subject: | Re: Mini CAD Drawing (DXF?) |
I would be keen for a copy too if possible |
|
| Author: | Hobson [ Tue Sep 08, 2015 9:00 am ] |
| Post subject: | Re: Mini CAD Drawing (DXF?) |
Would be keen as well. |
|
| Author: | braad [ Tue Sep 08, 2015 10:13 am ] |
| Post subject: | Re: Mini CAD Drawing (DXF?) |
Ditto to the above gentlemen |
|
| Author: | green63 [ Thu Sep 10, 2015 9:56 pm ] |
| Post subject: | Re: Mini CAD Drawing (DXF?) |
these are solidworks files i got them from grabcab.com they may have some autocad files as well. |
|
| Author: | simon k [ Sat Sep 12, 2015 11:58 am ] |
| Post subject: | Re: Mini CAD Drawing (DXF?) |
green63 wrote: these are solidworks files i got them from grabcab.com they may have some autocad files as well. not solidworks, 3d studio max
|
|
| Author: | DrFragnasty [ Mon Sep 21, 2015 7:37 pm ] |
| Post subject: | Re: Mini CAD Drawing (DXF?) |
Thanks for sharing the 3DS Max model, it's the best I've seen. |
|
| Author: | Hobson [ Thu Sep 24, 2015 11:34 am ] |
| Post subject: | Re: Mini CAD Drawing (DXF?) |
opened the file, I have 3ds Max at work. what formats would people like? |
|
| Author: | cruiza [ Thu Sep 24, 2015 2:56 pm ] |
| Post subject: | Re: Mini CAD Drawing (DXF?) |
freeware thanks yeah i am a cheap b$%^%t |
|
| Author: | Phil 850 [ Thu Sep 24, 2015 3:40 pm ] |
| Post subject: | Re: Mini CAD Drawing (DXF?) |
Unigraphics please! Phil |
|
| Author: | looopy [ Thu Sep 24, 2015 3:49 pm ] |
| Post subject: | Re: Mini CAD Drawing (DXF?) |
maybe a .rtv (revit) Cheers |
|
| Author: | Hobson [ Thu Sep 24, 2015 4:05 pm ] |
| Post subject: | Re: Mini CAD Drawing (DXF?) |
to be more specific, pick one.  EDIT: image changed |
|
| Author: | Phil 850 [ Fri Sep 25, 2015 6:40 am ] |
| Post subject: | Re: Mini CAD Drawing (DXF?) |
.IGS should import into almost all 3D systems. |
|
| Author: | jambos [ Fri Sep 25, 2015 8:39 am ] |
| Post subject: | Re: Mini CAD Drawing (DXF?) |
Autocad .DWG please |
|
| Author: | MikeJ [ Fri Sep 25, 2015 8:45 am ] |
| Post subject: | Re: Mini CAD Drawing (DXF?) |
AutoCAD (.dwg) please |
|
| Page 1 of 2 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|