Can anyone tell me if this screw is used for adjusting a Leyland mini tachometer?
Mine is reading 4300rpm compared to 4000rpm on the new timing light.
I have a feeling that there is a smaller screw that is hidden behind the front face as well.
| ausmini https://www.ausmini.com/forums/ |
|
| Leyland mini tacho adjustment https://www.ausmini.com/forums/viewtopic.php?f=2&t=90939 |
Page 1 of 1 |
| Author: | gtogreen1969 [ Sun Nov 01, 2015 5:32 pm ] |
| Post subject: | Leyland mini tacho adjustment |
Can anyone tell me if this screw is used for adjusting a Leyland mini tachometer? Mine is reading 4300rpm compared to 4000rpm on the new timing light. I have a feeling that there is a smaller screw that is hidden behind the front face as well.
|
|
| Author: | Mick [ Mon Nov 02, 2015 3:11 pm ] |
| Post subject: | Re: Leyland mini tacho adjustment |
Hey Brad, I read your message btw, but have been away. I forgot to reply. There is always a way to trim a tacho (Or just about any analogue instrument) because of internal changes due to manufacturing tolerances. It may be the pot you're looking at in the image you've put up, but I would need to have a look at it. I don't work with Leyland Instrument clusters really.. |
|
| Author: | gtogreen1969 [ Mon Nov 02, 2015 4:07 pm ] |
| Post subject: | Re: Leyland mini tacho adjustment |
Mick wrote: Hey Brad, I read your message btw, but have been away. I forgot to reply. There is always a way to trim a tacho (Or just about any analogue instrument) because of internal changes due to manufacturing tolerances. It may be the pot you're looking at in the image you've put up, but I would need to have a look at it. I don't work with Leyland Instrument clusters really.. Ok thanks. I will just play around with every adjusting screw I can find and see what happens. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|