| ausmini https://www.ausmini.com/forums/ |
|
| Handbrake quadrant trailing arm position https://www.ausmini.com/forums/viewtopic.php?f=2&t=91037 |
Page 1 of 1 |
| Author: | Jonnoh [ Mon Nov 16, 2015 4:14 pm ] |
| Post subject: | Handbrake quadrant trailing arm position |
Attachment: IMG_2210.JPG Hi, can someone confirm which way the handbrake quadrant goes? This is the problem with making stuff up from scratch with nothing to compare it to. I'm guessing it must be the same as in the photo but am happy to be advised otherwise  Thanks, Jon.
|
|
| Author: | niffty64 [ Mon Nov 16, 2015 4:53 pm ] |
| Post subject: | Re: Handbrake quadrant trailing arm position |
i dont know if it helps but you can just see the cable guide underneath 
|
|
| Author: | mini_mad_matt [ Mon Nov 16, 2015 5:29 pm ] |
| Post subject: | Re: Handbrake quadrant trailing arm position |
To refer to the first pic, the quadrant needs to be moved from the top of the arm to the bottom. You will also notice there is a short section and a long section on the quadrant. The short section should be orientated towards the middle of the car, long section towards the outside of the car. |
|
| Author: | Jonnoh [ Mon Nov 16, 2015 6:07 pm ] |
| Post subject: | Re: Handbrake quadrant trailing arm position |
Beautiful, thank you nifty64 for going to the trouble of getting the thing up on the jack, and thanks Matt also.. 
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|