ausmini
https://www.ausmini.com/forums/

Oil and temp gauges
https://www.ausmini.com/forums/viewtopic.php?f=2&t=91068		 Page 1 of 1
Author:  glenndunn [ Fri Nov 20, 2015 3:41 pm ]
Post subject:  Oil and temp gauges
Attachment:
image.jpg

Can anyone tell me if these are right or have been replaced and are not original
Author:  DavidE [ Fri Nov 20, 2015 3:56 pm ]
Post subject:  Re: Oil and temp gauges
glenndunn wrote:
Attachment:
image.jpg

Can anyone tell me if these are right or have been replaced and are not original


Not original fitment.
Author:  gtogreen1969 [ Fri Nov 20, 2015 4:37 pm ]
Post subject:  Re: Oil and temp gauges
A Mk1 S should have these gauges. The binnacle on a MK1 is screwed on differently to the MK2 binnacle that you are using.
Image

Image
Author:  glenndunn [ Sat Nov 21, 2015 7:00 am ]
Post subject:  Re: Oil and temp gauges
So is mine a Mk11 binnacle ?
Author:  goodie [ Sat Nov 21, 2015 7:18 am ]
Post subject:  Re: Oil and temp gauges
glenndunn wrote:
So is mine a Mk11 binnacle ?


Yes , Mini K are the same as well .
Author:  Mick [ Sat Nov 21, 2015 7:25 am ]
Post subject:  Re: Oil and temp gauges
They were once a really popular upgrade, so are a very legitimate period modification.

On one of my cars they were so sensitive I could watch the thermostat open and shut by the temperature flutter.
Author:  36 [ Sat Nov 21, 2015 9:14 am ]
Post subject:  Re: Oil and temp gauges
Personally I prefer full sweep gauges. Black and White Smiths gauges are gorgeous.
Author:  1018cc [ Sat Nov 21, 2015 9:51 am ]
Post subject:  Re: Oil and temp gauges
+1 for 270° sweep gauges. Much easier to look at out of the corner of your eye
Author:  glenndunn [ Sun Nov 22, 2015 6:59 am ]
Post subject:  Re: Oil and temp gauges
Thanks everyone for your help
Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/