| ausmini https://www.ausmini.com/forums/ |
|
| Cooper S Gearbox Remote Change https://www.ausmini.com/forums/viewtopic.php?f=2&t=91131 |
Page 1 of 1 |
| Author: | GundyGuy [ Sat Nov 28, 2015 6:36 pm ] |
| Post subject: | Cooper S Gearbox Remote Change |
Just wondering what is an acceptable amount of slop/free play at the gear stick on a remote gearchange And what are the common parts that wear out |
|
| Author: | simon k [ Sat Nov 28, 2015 9:04 pm ] |
| Post subject: | Re: Cooper S Gearbox Remote Change |
there are bushes through the assembly that can be replaced - I replaced the bushes for the vertical shaft in the diff housing and it made a huge difference |
|
| Author: | drmini in aust [ Sat Nov 28, 2015 10:59 pm ] |
| Post subject: | Re: Cooper S Gearbox Remote Change |
There are also ball and socket joints in 4 places on a remote shift box. The balls wear oval or get flats on them. When bad, I have had success building them up with 2.5mm Toolcraft electrode, then sanding back to shape on a linisher belt. In the remote, there is a split nylon ring on top of the shifter's big ball, and a nylon socket on the bottom ball. Replace both if worn, apply grease on assembly. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|