ausmini
https://www.ausmini.com/forums/

850 Rear Trim Retainer
https://www.ausmini.com/forums/viewtopic.php?f=2&t=91824
Page 1 of 1

Author:  IndigoBlueCooperS [ Sat Feb 13, 2016 2:45 pm ]
Post subject:  850 Rear Trim Retainer

Hi All,
How is the rear side trim held in place on a 1962 Aussie assembled 850.
Do they use the stainless steel strip riveted in place as per the later Mini's (as per white car in photo), or is it mild steel welded in place and painted body colour as per the Red car (which was once white)?

Image

Image

Author:  timmy201 [ Sat Feb 13, 2016 4:06 pm ]
Post subject:  Re: 850 Rear Trim Retainer

My late 63 850 has the body coloured one like your bottom photo

Author:  IndigoBlueCooperS [ Mon Feb 15, 2016 6:41 pm ]
Post subject:  Re: 850 Rear Trim Retainer

Any more comments on this?
Was the 850 trim retaining strip welded or riveted in?

Author:  Bubbacluby [ Mon Feb 15, 2016 11:23 pm ]
Post subject:  Re: 850 Rear Trim Retainer

I cut up a 62 850 about a fortnight ago. I still have some of the back section I should be able to answer your question from.

Dont think i will get around to looking at it until the weekend though

Author:  Goldbrocade_62 [ Tue Feb 16, 2016 3:58 pm ]
Post subject:  Re: 850 Rear Trim Retainer

Every 854 and cooper I have had have been spot welded and painted body colour

Author:  Fritz [ Tue Feb 16, 2016 8:02 pm ]
Post subject:  Re: 850 Rear Trim Retainer

Got some photos of my 64 850
Attachment:
20160216_175655.jpg

Spot welded and colour coded
Attachment:
20160216_175629.jpg

Author:  Phil 850 [ Tue Feb 16, 2016 8:15 pm ]
Post subject:  Re: 850 Rear Trim Retainer

Same as my 64 850 and my daughters 62 850.

Author:  IndigoBlueCooperS [ Tue Feb 16, 2016 8:45 pm ]
Post subject:  Re: 850 Rear Trim Retainer

Thanks for the info, especially the photos.

Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/