ausmini https://www.ausmini.com/forums/ |
|
What carby is this? https://www.ausmini.com/forums/viewtopic.php?f=2&t=91856 |
Page 1 of 1 |
Author: | 2lateagain [ Thu Feb 18, 2016 9:44 am ] |
Post subject: | What carby is this? |
Could anyone tell me what this carby is, it is one of a pair, left and right, but the other has some wrong parts on it, it has a 30mm approx throat. Only marks are on the top and side of the bowl and it has four screws holding the bowl top. The two are linked by the flat section at the front of the last photo. I think that the SU mounting holes are vertical. ![]() Graham |
Author: | timmy201 [ Thu Feb 18, 2016 9:56 am ] |
Post subject: | Re: What carby is this? |
They are Hitachi brand, similar to SU carbs but made in Japan. |
Author: | 2lateagain [ Thu Feb 18, 2016 6:26 pm ] |
Post subject: | Re: What carby is this? |
Thanks Tim, I will store it somewhere just in case someone wants it in the future. Graham |
Author: | TheMiniMan [ Thu Feb 18, 2016 6:42 pm ] |
Post subject: | Re: What carby is this? |
i have a pair of twin 1&1/2s here if anyones keen on em ![]() |
Page 1 of 1 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |