| ausmini https://www.ausmini.com/forums/ |
|
| Help! https://www.ausmini.com/forums/viewtopic.php?f=2&t=91889 |
Page 1 of 1 |
| Author: | ewatkins [ Sat Feb 20, 2016 3:35 pm ] |
| Post subject: | Help! |
Hey Guys, So the previous owner has f***ed the rear wheel bearing thread on my rear arms, and i need to change them. does anyone know how to replace the rod that goes through the rear wheel bearing? snooping around at it looks like it has a clip but the end seems fragile so i dont want to go swinging a hammer at the end without knowing the official way... I have plenty of spare, just need to know how to get them out of the arm. Cheers Evan |
|
| Author: | John Smidt [ Sat Feb 20, 2016 4:13 pm ] |
| Post subject: | Re: Help! |
ewatkins wrote: Hey Guys, So the previous owner has f***ed the rear wheel bearing thread on my rear arms, and i need to change them. does anyone know how to replace the rod that goes through the rear wheel bearing? snooping around at it looks like it has a clip but the end seems fragile so i dont want to go swinging a hammer at the end without knowing the official way... I have plenty of spare, just need to know how to get them out of the arm. Cheers Evan I use a press to get them out, and to put the new on in. the clip is to stop it going to far when putting the replacement axel in. Note these parts have a left hand thread for the left side and right hand thread on the other side, so make sure you select the correct one for side you are working on, |
|
| Author: | doogie [ Sat Feb 20, 2016 4:14 pm ] |
| Post subject: | Re: Help! |
They need to be pressed out. Doogie |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|