DrMini pot joint removal tool, part 1.
Part 2 is a BFH.
| ausmini https://www.ausmini.com/forums/ |
|
| pot joint removal tool at mini kingdom online https://www.ausmini.com/forums/viewtopic.php?f=2&t=91998 |
Page 1 of 1 |
| Author: | drjbeam [ Wed Mar 02, 2016 6:46 pm ] |
| Post subject: | pot joint removal tool at mini kingdom online |
http://minikingdomonline.com.au/product ... over-tool/ The best tool to have if you have a pot joint mini I got mine from mini spares england cause no one here had them when i needed it Ive used it twice so far just put it between the diff cover and pot joint 2 wacks with a hammer and there off |
|
| Author: | mini0998 [ Wed Mar 02, 2016 7:12 pm ] |
| Post subject: | Re: pot joint removal tool at mini kingdom online |
Attachment: image.jpeg This is my pot joint removal tool. It took half an hour of my time to make and used bits I had lying around. |
|
| Author: | DavidE [ Thu Mar 03, 2016 8:41 am ] |
| Post subject: | Re: pot joint removal tool at mini kingdom online |
drjbeam wrote: http://minikingdomonline.com.au/product/pot-joint-remover-tool/ The best tool to have if you have a pot joint mini I got mine from mini spares england cause no one here had them when i needed it Ive used it twice so far just put it between the diff cover and pot joint 2 wacks with a hammer and there off For me, my selection of wrecking bars (the blade end) work a treat. There you go, Bob's your uncle, and they're off. |
|
| Author: | drjbeam [ Thu Mar 03, 2016 8:26 pm ] |
| Post subject: | Re: pot joint removal tool at mini kingdom online |
DavidE wrote: drjbeam wrote: http://minikingdomonline.com.au/product/pot-joint-remover-tool/ The best tool to have if you have a pot joint mini I got mine from mini spares england cause no one here had them when i needed it Ive used it twice so far just put it between the diff cover and pot joint 2 wacks with a hammer and there off For me, my selection of wrecking bars (the blade end) work a treat. There you go, Bob's your uncle, and they're off. I tried that with different bars with no luck when I first noticed the oil seal leaking after calling a few mini mechanics they all told me to do it that way Then I noticed there was a tool in johns mini king parts catalogue call him with no luck then the part number went in google and got it from England 1 week later its at me door |
|
| Author: | drmini in aust [ Fri Mar 04, 2016 7:43 am ] |
| Post subject: | Re: pot joint removal tool at mini kingdom online |
DrMini pot joint removal tool, part 1. Part 2 is a BFH.
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|