OK. going to order the mags for evil tomoz. Minispeed design alloy split rim wheels set
OK.. so the question is 10x6" or 10x7" and what a good tyers that will fit??
Thanks
Cody
| ausmini https://www.ausmini.com/forums/ |
|
| wheels and tyers https://www.ausmini.com/forums/viewtopic.php?f=2&t=9222 |
Page 1 of 3 |
| Author: | GT1360 [ Tue Jul 19, 2005 8:00 am ] |
| Post subject: | wheels and tyers |
OK. going to order the mags for evil tomoz. Minispeed design alloy split rim wheels set
OK.. so the question is 10x6" or 10x7" and what a good tyers that will fit?? Thanks Cody
|
|
| Author: | Metalfab_101 [ Tue Jul 19, 2005 8:18 am ] |
| Post subject: | |
Nice! What price they give you? Are 10x7 legal? Dunno if that will affect your descision or not 
|
|
| Author: | GT1360 [ Tue Jul 19, 2005 8:26 am ] |
| Post subject: | |
The total cost with carriage would be ?684. so around 1700 for the 4
|
|
| Author: | djhaddo1 [ Tue Jul 19, 2005 8:27 am ] |
| Post subject: | |
Umm, YUM!!! 
Not going for 6's front and 7's back? |
|
| Author: | J_A_M [ Tue Jul 19, 2005 8:30 am ] |
| Post subject: | |
ooohhh...evil rims for an evil car!!! 
NICE!!!! |
|
| Author: | GT1360 [ Tue Jul 19, 2005 8:49 am ] |
| Post subject: | |
i would go the 6" for front and 7" back.. but they don't split them up. its 4 of each.. so it one or the other.. 
Still going to look sweet |
|
| Author: | J_A_M [ Tue Jul 19, 2005 8:54 am ] |
| Post subject: | |
go 6"......tyres will be easier to source for them. |
|
| Author: | GT1360 [ Tue Jul 19, 2005 9:00 am ] |
| Post subject: | |
i know.... But how mad would be 7" look under evil..
|
|
| Author: | poeee [ Tue Jul 19, 2005 9:25 am ] |
| Post subject: | |
6" for sure... and legal. 
|
|
| Author: | Fruity [ Tue Jul 19, 2005 9:55 am ] |
| Post subject: | Re: wheels and tyers |
GT1310 wrote: what a good tyers that will fit??
What are tyers? ......Oh you mean tyres
Those rims have attitude, I like 'em! |
|
| Author: | marcsvenson [ Tue Jul 19, 2005 10:03 am ] |
| Post subject: | |
ok dont laugh but why are they called split rims there awesome go 6s |
|
| Author: | czerial [ Tue Jul 19, 2005 10:13 am ] |
| Post subject: | |
i LOVE them. they are my Fav of all time!! go the 6" mate for sure, SPlit rims because (i think) they are not a one piece wheel, i.e they ae made up of threee parts or so and put together that way? |
|
| Author: | cush [ Tue Jul 19, 2005 10:28 am ] |
| Post subject: | |
those look like two piece splits... 
|
|
| Author: | Matt68 [ Tue Jul 19, 2005 1:15 pm ] |
| Post subject: | |
these are 10" rims right? I thought that there were very few tyre sizes available for wide 10" rims. Basically, that you'll be using the samre tyres on a 6" wide rim as on a 7" wide rim. The tyre will look a a lot better on a 6" wide rim in that case, and will help to protect from gutter rash. Although I think you may have trouble getting wider than 165s for street rubber anyway, so there still gonna look wierd. Me, I like the look of 165s on a 5 or 5.5 inch rim. Fills the rims in good proportion. What tyres were you looking at getting? Cheers matt |
|
| Author: | GT1360 [ Tue Jul 19, 2005 1:24 pm ] |
| Post subject: | |
yes they are 10" rims. and they are 3 peice.. lol no idea what tyre to get yet. (thanks fruity I was just happy about the wheels dont care what keys i hit)
|
|
| Page 1 of 3 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|