| ausmini https://www.ausmini.com/forums/ |
|
| Windscreen wiper motor https://www.ausmini.com/forums/viewtopic.php?f=2&t=92299 |
Page 1 of 1 |
| Author: | lockwood [ Mon Apr 04, 2016 4:12 pm ] |
| Post subject: | Windscreen wiper motor |
An acquaintance has a 68 Mk1 Mini, not a Cooper S, he has a 2 speed, round wiper motor fitted but when turned on, the blades go off the screen at both ends of sweep. I had a look at the gearing and it says 32T (I'm guessing 32 teeth) 105*. I thought the 105* would have been the degrees of sweep, but if this was the case, it would be about 180* Any suggestions? |
|
| Author: | drmini in aust [ Mon Apr 04, 2016 4:30 pm ] |
| Post subject: | Re: Windscreen wiper motor |
He will need to adapt the later wheel boxes to it. Because the rack stroke is now greater. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|