| ausmini https://www.ausmini.com/forums/ |
|
| Paint question https://www.ausmini.com/forums/viewtopic.php?f=2&t=92392 |
Page 1 of 1 |
| Author: | mooman10_0 [ Fri Apr 15, 2016 3:35 am ] |
| Post subject: | Paint question |
About to start body resto on 81 galv moke, qu is what type of primer should i be using, i will not have access to a booth, this will be done in my shed, acrylic paint is what i use, never painted on galv steel before. Cheers, Steve |
|
| Author: | low n blown [ Fri Apr 15, 2016 7:43 am ] |
| Post subject: | Re: Paint question |
mooman10_0 wrote: About to start body resto on 81 galv moke, qu is what type of primer should i be using, i will not have access to a booth, this will be done in my shed, acrylic paint is what i use, never painted on galv steel before. Cheers, Steve There is a special type of acid etch primer for Galvanised metal. Speak to a proper automotive paint supplier. Try PPG in your state. G. |
|
| Author: | mooman10_0 [ Fri Apr 15, 2016 8:38 am ] |
| Post subject: | Re: Paint question |
Thanks for that, will do when in Adelaide next |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|