A few dabs in the middle of the straight bits only... you may want to remove/change it one day.....
Cheers, Ian
| ausmini https://www.ausmini.com/forums/ |
|
| Don't take this the wrong way.... But, https://www.ausmini.com/forums/viewtopic.php?f=2&t=92478 |
Page 1 of 1 |
| Author: | zulu_warrior1976 [ Mon Apr 25, 2016 3:11 pm ] |
| Post subject: | Don't take this the wrong way.... But, |
Hi all, Got the mini out into the beautiful sunshine today. Kids jumped in and turned the key after a few months of not turning it over. Fired well and warmed up well. Strange question here though, opened the car door and the rubber came away with the door. Anyone know of any correct glue to stick back a detached rubber? Zulu |
|
| Author: | drmini in aust [ Mon Apr 25, 2016 3:50 pm ] |
| Post subject: | Re: Don't take this the wrong way.... But, |
You could try selleys kwikgrip but I would buy a new rubber which comes with the pinch weld attached. It pushes onto the body flange, no glue required. |
|
| Author: | peterb [ Mon Apr 25, 2016 4:49 pm ] |
| Post subject: | Re: Don't take this the wrong way.... But, |
clark rubber has it in black. |
|
| Author: | winabbey [ Mon Apr 25, 2016 4:51 pm ] |
| Post subject: | Re: Don't take this the wrong way.... But, |
I bought a can of rubber adhesive from Scott's Old Auto rubber. Surely Clarke or other rubber outlets would have something suitable. |
|
| Author: | 1071 S [ Mon Apr 25, 2016 6:07 pm ] |
| Post subject: | Re: Don't take this the wrong way.... But, |
A few dabs in the middle of the straight bits only... you may want to remove/change it one day..... Cheers, Ian |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|