ausmini https://www.ausmini.com/forums/ |
|
Petronix Kit https://www.ausmini.com/forums/viewtopic.php?f=2&t=9280 |
Page 1 of 1 |
Author: | Hanra [ Wed Jul 20, 2005 1:46 pm ] |
Post subject: | Petronix Kit |
Ok, Im about to purchase the Ignitor II and Flame Thrower II kit, but Ive rung around and apparently there is no kit to suit the Lucas 29D Dizzy???? No as far as i know the 25D and 29D are basically the same, is there a kit t suit the 25D?? Has any 1 used this kit on this dizzy b4?? Or have any other ideas?? Cheers. |
Author: | FatMaserati [ Wed Jul 20, 2005 2:45 pm ] |
Post subject: | |
Do a forum search. This has just been discussed recently I think in Mini Mods. |
Author: | Hanra [ Wed Jul 20, 2005 5:14 pm ] |
Post subject: | |
Yeah i did do a search, nothing concrete though. By the looks of it a LU-142A is the kit i need?? |
Author: | drmini in aust [ Wed Jul 20, 2005 7:45 pm ] |
Post subject: | |
29D is a bit of an Oz hybrid. I would get a 45D dizzy and bung one in that. Better dizzy IMO, if you must have a Lucas... ![]() I ran one for a few years in Ha-Ha, no problems- but it's now in Ozmotorsport's Mini. ![]() |
Author: | Hanra [ Fri Jul 22, 2005 7:43 pm ] |
Post subject: | |
So ive just ordered the LU-142A from some joint in the USA. Proquip in OZ want $220 for it here, US its $63 plus $7.5, dunno what that works out to be but will be cheaper than$220. See if i can get it to go down on the 29D, if not ill bodge somthing up!!! Gotta get the advance curve sorted on itas well. |
Page 1 of 1 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |