| ausmini https://www.ausmini.com/forums/ |
|
| wiring loom https://www.ausmini.com/forums/viewtopic.php?f=2&t=9304 |
Page 1 of 1 |
| Author: | eaglemini [ Wed Jul 20, 2005 9:32 pm ] |
| Post subject: | wiring loom |
hey guys, geez, been ages since I posted in here but my mini is once again getting a spurt of energy and money spent on it. Has anyone replaced a wiring loom, how much was the loom and labour? there is the oroiginal loom in it but seems a little old and the wires are all the same shade of grime. Could a auto electrician do a suitable job with the old loom or am i better off starting fresh? cheers guys 
|
|
| Author: | doogie [ Wed Jul 20, 2005 9:45 pm ] |
| Post subject: | |
You can buy new original style harnesses from Vinwire on the north coast of NSW, sorry i don't have there contact details anymore, i bought one for my MK2 Cooper S it cost around $350 from memory, my auto electrain mate had a look at it & said he could'nt make it for under $700, so there good value. Doogie |
|
| Author: | eaglemini [ Wed Jul 20, 2005 10:19 pm ] |
| Post subject: | |
Thanks for that, I must say just for my own sanity i would prefer to get a new loom than stuff around for the ages with the old one. Much work to put the new one in? |
|
| Author: | doogie [ Wed Jul 20, 2005 10:32 pm ] |
| Post subject: | |
Can't tell you, it has'nt been fitted back in the car yet, anyway all the terminals are numbered & a fact sheet tells you where the numbers go to. Doogie |
|
| Author: | Chris [ Wed Jul 20, 2005 11:36 pm ] |
| Post subject: | |
2 S's & a clubman wrote: Can't tell you, it has'nt been fitted back in the car yet, anyway all the terminals are numbered & a fact sheet tells you where the numbers go to.
Doogie Do these repro looms have colour coded wire ala the original looms or are they all the same colour? |
|
| Author: | FatMaserati [ Thu Jul 21, 2005 1:09 am ] |
| Post subject: | |
I bought my new loom from Mini Spares Central in NSW. Put it in myself. Piece of cake. Was bout $150 from memory. |
|
| Author: | doogie [ Thu Jul 21, 2005 8:05 am ] |
| Post subject: | |
The harnesses are as per original, every concourse resto i've seen has one of these vinwire harnesses in it. Doogie |
|
| Author: | Wombat [ Thu Jul 21, 2005 9:16 am ] |
| Post subject: | |
I got mine through Northern Mini Spares in Melb . It came from WA (and I live in Brisbane - figure that out  ) Full loom - front and back Cost $300 original colour codes and cloth wrapped as per original. Easy as to put in - feed through the hole in the brace piece near the fuses first before all else 
|
|
| Author: | KennyKix [ Fri Jul 22, 2005 6:41 pm ] |
| Post subject: | Vinwire Contact Details! |
Found their website for all who are interested?!? Vintage Wiring Harnesses I even linked it to the Mini section for you.
Not bad, but they dont list the clubmans?!? 
Anyone know if they are swappable with anything else? (Leyland Clubman S 1975/76) Cheers, Adam |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|