ausmini
https://www.ausmini.com/forums/

Cooper S fuel pump breather rivet clippy thingy
https://www.ausmini.com/forums/viewtopic.php?f=2&t=93326		 Page 1 of 1
Author:  TheMiniMan [ Tue Aug 02, 2016 2:13 pm ]
Post subject:  Cooper S fuel pump breather rivet clippy thingy
hi all, some of you may have noticed that i found some Cooper S fuel pump
rivets in dads old stuff
so i`ve put one on ebay & it`s sold, i`ve also had a few offers so i`ve sold some more
i`ve got people wanting them in England Ireland etc
so i figured that i`d get a batch copied & re-made from these new ones
they`re done now & on there way back to Aust
i`ll have them within a week, Kevs bringing them back with him in his walk-on luggage :-)

these were also fitted to some early 850s & some morris 1100s

does anyone know what else they were fitted too?

Image

Image
Author:  drmini in aust [ Tue Aug 02, 2016 2:58 pm ]
Post subject:  Re: Cooper S fuel pump breather rivet clippy thingy
997 (and probably 998) Cooper had them.
Author:  winabbey [ Tue Aug 02, 2016 3:46 pm ]
Post subject:  Re: Cooper S fuel pump breather rivet clippy thingy
TheMiniMan wrote:
does anyone know what else they were fitted too?

They went with the SU AUF201 ventilated fuel pump so I assume any car with that pump would have the breather. According to the part number reference fiche 13H1640 was only fitted to the Mini series but I've heard the 1100 had it as well.

Attachment:
13H1640 on Model Ref Fiche.jpg
Attachment:
BMCTechnicalBulletin1A11964-05-27_Page_1.jpg
Attachment:
BMCTechnicalBulletin1A11964-05-27_Page_2.jpg
Attachment:
BMCTechnicalBulletin1A11964-05-27_Page_3.jpg
Attachment:
BMCTechnicalBulletin1A11964-05-27_Page_4.jpg
Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/