Has anyone ever installed these http://minikingdomonline.com.au/product ... sh-guards/
I am very confused
| ausmini https://www.ausmini.com/forums/ |
|
| mesh light covers https://www.ausmini.com/forums/viewtopic.php?f=2&t=93334 |
Page 1 of 1 |
| Author: | oldblade [ Tue Aug 02, 2016 9:13 pm ] |
| Post subject: | mesh light covers |
Has anyone ever installed these http://minikingdomonline.com.au/product ... sh-guards/ I am very confused
|
|
| Author: | timmy201 [ Wed Aug 03, 2016 7:29 am ] |
| Post subject: | Re: mesh light covers |
I have. Three clips per side are screwed in to the headlight retaining ring. I bent the clips a little to hold the mesh on better 
|
|
| Author: | Slugman [ Wed Aug 03, 2016 9:58 am ] |
| Post subject: | Re: mesh light covers |
I've had them on my clubby for years with no broken glass to date. The above pic from timmy201 shows fitment. If you angle them slightly you can get a subtle angry-eyes look, or sad if you go the other way. 
|
|
| Author: | oldblade [ Wed Aug 03, 2016 10:18 am ] |
| Post subject: | Re: mesh light covers |
Thanks ill have a go again tonight |
|
| Author: | 71morris [ Wed Aug 03, 2016 2:50 pm ] |
| Post subject: | Re: mesh light covers |
I prefer the mesh guard that sits under the headlight ring without clips are the ones you are describing the actual mini ones though? |
|
| Author: | AWOODY [ Wed Aug 03, 2016 2:55 pm ] |
| Post subject: | Re: mesh light covers |
Oldblade I have the ones that sit under the headlight rim willing to sell you a set. |
|
| Author: | JimL [ Wed Aug 03, 2016 3:01 pm ] |
| Post subject: | Re: mesh light covers |
I had trouble fitting them up to my Clubman when attempting to fit them as timmy has. they would not fit behind the headlight surrounds/grill, even when i cut the clips down to pull the covers further back to the headlight. I ended up attaching them to the headlight surrounds and it still looks pretty good |
|
| Author: | simon k [ Wed Aug 03, 2016 3:28 pm ] |
| Post subject: | Re: mesh light covers |
AWOODY wrote: Oldblade I have the ones that sit under the headlight rim willing to sell you a set. I have this type... one time I had a filament go so replaced the light with a newie, then I looked at the difference between the new light and the old light on the other side and OH MY GOD THERE WAS A LOT OF CRAP ON THE LIGHT!!! the mesh makes it pretty hard to clean the headlights 
|
|
| Author: | oldblade [ Wed Aug 03, 2016 4:02 pm ] |
| Post subject: | Re: mesh light covers |
I have already bought them it was one of those "that might look nice" purchases. After trying to fit them they may end up on the garage wall[SMILING FACE WITH OPEN MOUTH AND TIGHTLY-CLOSED EYES] |
|
| Author: | timmy201 [ Wed Aug 03, 2016 4:34 pm ] |
| Post subject: | Re: mesh light covers |
I did some modification of the clips with some needle nose pliers to get them to stay on better. 
|
|
| Author: | oldblade [ Wed Aug 03, 2016 4:52 pm ] |
| Post subject: | Re: mesh light covers |
Thanks |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|