| ausmini https://www.ausmini.com/forums/ |
|
| Wheel ET https://www.ausmini.com/forums/viewtopic.php?f=2&t=93404 |
Page 1 of 1 |
| Author: | AWOODY [ Wed Aug 10, 2016 3:51 pm ] |
| Post subject: | Wheel ET |
Which way would a ET of 17 push the wheels in or out ? |
|
| Author: | timmy201 [ Wed Aug 10, 2016 3:59 pm ] |
| Post subject: | Re: Wheel ET |
The lower the number, the further out of the arches they will stick.. ROH Contessa 10x5 alloys with the "normal" offset are around +17. The "LS" style ones would be around +35 to +40? |
|
| Author: | AWOODY [ Wed Aug 10, 2016 4:06 pm ] |
| Post subject: | Re: Wheel ET |
Thanks Tim so wheels with ET 17 should fill the arches nicely. |
|
| Author: | timmy201 [ Wed Aug 10, 2016 5:26 pm ] |
| Post subject: | Re: Wheel ET |
If they are 5x10 they will be pretty similar to the Contessas. If they are 6x10 there will be an additional 1/2" of wheel on the inside and outside. Attachment: IMG_0223.JPG Attachment: IMG_0441.JPG
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|