ausmini https://www.ausmini.com/forums/ |
|
Speedo gear and pinion https://www.ausmini.com/forums/viewtopic.php?f=2&t=93433 |
Page 1 of 1 |
Author: | miniblue [ Sat Aug 13, 2016 6:24 pm ] |
Post subject: | Speedo gear and pinion |
I know this has been probably asked before but I have gone from a 3.76 diff to a 3.1 With 10" wheels and the motor is an aussie 998 is there a correct gear set available for this diff ratio ? |
Author: | Matt I [ Sat Aug 13, 2016 9:33 pm ] |
Post subject: | Re: Speedo gear and pinion |
You need a 7/16 according to the Guessworks calculator (http://www.guess-works.com/Tech/ratio.htm) assuming a 1408 TPM speedo (850/deluxe/mini k). Guessworks have the 16t as a new part, and usually have the 7t used, but this is shown as out of stock currently. 16t: http://www.guess-works.com/Shop/Parts/d ... htm?id=299 7t: http://www.guess-works.com/Shop/Parts/d ... htm?id=326 |
Author: | miniblue [ Mon Aug 15, 2016 7:58 am ] |
Post subject: | Re: Speedo gear and pinion |
Thanks Matt It makes perfect sense. |
Page 1 of 1 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |