71morris wrote:
or does someone know the numbers?
I am trying to narrow down a year for a wiper motor
I am trying to narrow down a year for a wiper motor
Does this help
| ausmini https://www.ausmini.com/forums/ |
|
| 850 production in Australia https://www.ausmini.com/forums/viewtopic.php?f=2&t=93508 |
Page 1 of 1 |
| Author: | 71morris [ Fri Aug 19, 2016 7:05 pm ] |
| Post subject: | 850 production in Australia |
how long was 850 production in Australia when did it cease around 1964/65? |
|
| Author: | Convertible Mini [ Fri Aug 19, 2016 7:13 pm ] |
| Post subject: | Re: 850 production in Australia |
I have a 1966. |
|
| Author: | Minicooper4me [ Fri Aug 19, 2016 7:16 pm ] |
| Post subject: | Re: 850 production in Australia |
Unofficially they are still in production. Have a look at Flapper's production line. |
|
| Author: | 71morris [ Fri Aug 19, 2016 7:21 pm ] |
| Post subject: | Re: 850 production in Australia |
ok if you have a body number is their a list to tell you how late the production of the car/van is |
|
| Author: | 71morris [ Fri Aug 19, 2016 7:26 pm ] |
| Post subject: | Re: 850 production in Australia |
or does someone know the numbers? |
|
| Author: | gtogreen1969 [ Fri Aug 19, 2016 7:59 pm ] |
| Post subject: | Re: 850 production in Australia |
71morris wrote: or does someone know the numbers? I am trying to narrow down a year for a wiper motor Does this help
|
|
| Author: | gtogreen1969 [ Fri Aug 19, 2016 8:02 pm ] |
| Post subject: | Re: 850 production in Australia |
And here is a passport to service for a 1966 Morris 850. 
|
|
| Author: | 71morris [ Fri Aug 19, 2016 8:06 pm ] |
| Post subject: | Re: 850 production in Australia |
yes, there is two numbers on the ID plate it might have the UK number engine not the Australian 8y |
|
| Author: | 71morris [ Fri Aug 19, 2016 8:10 pm ] |
| Post subject: | Re: 850 production in Australia |
are the engines two different one UK CKD 850 and the other Australian prefix 8Y? |
|
| Author: | gtogreen1969 [ Fri Aug 19, 2016 8:24 pm ] |
| Post subject: | Re: 850 production in Australia |
Early engines are 8AMUH. Around car YMA2S1 41000 they went to 8YUH |
|
| Author: | 71morris [ Fri Aug 19, 2016 8:42 pm ] |
| Post subject: | Re: 850 production in Australia |
info |
|
| Author: | 71morris [ Fri Aug 19, 2016 8:53 pm ] |
| Post subject: | Re: 850 production in Australia |
just putting this link there when I find out the colour http://www.ausmini.com/forums/viewtopic.php?f=25&t=66469 |
|
| Author: | 71morris [ Sat Aug 20, 2016 4:03 pm ] |
| Post subject: | Re: 850 production in Australia |
white all over |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|