Ok, Im about to purchase the Ignitor II and Flame Thrower II kit, but Ive rung around and apparently there is no kit to suit the Lucas 29D Dizzy???? No as far as i know the 25D and 29D are basically the same, is there a kit t suit the 25D?? Has any 1 used this kit on this dizzy b4?? Or have any other ideas??
Cheers.

Do a forum search. This has just been discussed recently I think in Mini Mods.

_________________
Jonathan
http://photobucket.com/albums/y64/FatMaserati/

Yeah i did do a search, nothing concrete though. By the looks of it a LU-142A is the kit i need??

29D is a bit of an Oz hybrid.
I would get a 45D dizzy and bung one in that. Better dizzy IMO, if you must have a Lucas...
I ran one for a few years in Ha-Ha, no problems- but it's now in Ozmotorsport's Mini.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.

So ive just ordered the LU-142A from some joint in the USA. Proquip in OZ want $220 for it here, US its $63 plus $7.5, dunno what that works out to be but will be cheaper than$220. See if i can get it to go down on the 29D, if not ill bodge somthing up!!! Gotta get the advance curve sorted on itas well.