| ausmini https://www.ausmini.com/forums/ |
|
| Starting issue https://www.ausmini.com/forums/viewtopic.php?f=2&t=93828 |
Page 1 of 1 |
| Author: | ricksmini [ Sun Sep 25, 2016 5:59 pm ] |
| Post subject: | Starting issue |
Hi all recently just got my mini going and painted.Been a few weeks in the process of putting it back together, but I went to start it today and not go. It's got 12.4 volts at the battery. Same amount of power at the starter soloniod. But don't have any spark. Running an Aldony dizzy. Is the battery to low in charge? It keeps winding over but no fire. Getting fuel into Webber. |
|
| Author: | bluehishouse [ Sun Sep 25, 2016 7:55 pm ] |
| Post subject: | Re: Starting issue |
Whack a jump pack on it. If it fires, the battery will be buggered. Cheapest place to begin Sent from my SM-G900I using Tapatalk |
|
| Author: | ricksmini [ Sun Sep 25, 2016 8:20 pm ] |
| Post subject: | Re: Starting issue |
The battery has been on charge all day. It just winds and winds. Stuck a screw driver in one of the plugs to the head but no spark. Coil is about a month old so is the dizzy |
|
| Author: | Phil 850 [ Sun Sep 25, 2016 10:41 pm ] |
| Post subject: | Re: Starting issue |
Check that you have power to the coil. Are the points opening and closing. I know it's basic but ...... |
|
| Author: | ricksmini [ Mon Sep 26, 2016 6:02 am ] |
| Post subject: | Re: Starting issue |
How do you check for power to the coil? It's an electric dizzy |
|
| Author: | ricksmini [ Mon Sep 26, 2016 7:06 pm ] |
| Post subject: | Re: Starting issue |
Googled how to test a coil have power on both sides. I'm wondering if the modual in the dizzy is blown again. |
|
| Author: | Convertible Mini [ Tue Sep 27, 2016 5:15 am ] |
| Post subject: | Re: Starting issue |
What Coil are you using? Has it fired up and ran at all since you put it together? |
|
| Author: | goodie [ Tue Sep 27, 2016 7:09 am ] |
| Post subject: | Re: Starting issue |
Do you have a points dizzy you can throw in it , process of elimination . |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|