Crikey, if you put a MPI head on it, you'll have to get it re-engineered as a new car.
| ausmini https://www.ausmini.com/forums/ |
|
| Can you a MPI head on a non injected 1275 without any proble https://www.ausmini.com/forums/viewtopic.php?f=2&t=94081 |
Page 1 of 1 |
| Author: | whoopspiggy [ Thu Oct 27, 2016 6:12 am ] |
| Post subject: | Can you a MPI head on a non injected 1275 without any proble |
Hello I was wondering if anyone can tell if there is problems with bolting a MPI head onto a series (pre a+) 1275? Thanks Scott Sent from my iPad using Tapatalk |
|
| Author: | Harley [ Thu Oct 27, 2016 8:00 am ] |
| Post subject: | Re: Can you a MPI head on a non injected 1275 without any pr |
Shouldnt be any they were the same as everything else. Its the mpi blocks that are different cause they dont have a distributor. |
|
| Author: | whoopspiggy [ Thu Oct 27, 2016 8:10 am ] |
| Post subject: | Re: Can you a MPI head on a non injected 1275 without any pr |
Harley wrote: Shouldnt be any they were the same as everything else. . Thanks, the CC is the same size, it all looks straight forward, I am assuming manifolds will bold straight upIts the mpi blocks that are different cause they dont have a distributor. Sent from my iPad using Tapatalk |
|
| Author: | peterb [ Thu Oct 27, 2016 5:54 pm ] |
| Post subject: | Re: Can you a MPI head on a non injected 1275 without any pr |
| Crikey, if you put a MPI head on it, you'll have to get it re-engineered as a new car.
|
|
| Author: | IndigoBlueCooperS [ Thu Oct 27, 2016 6:21 pm ] |
| Post subject: | Re: Can you a MPI head on a non injected 1275 without any pr |
I have an MPI head on a 1275. It did not have fittings for the standard temp sender, bypass hose and heater outlet. It may not be a problem for your application, and some MPI heads may have these fittings. |
|
| Author: | whoopspiggy [ Thu Oct 27, 2016 8:59 pm ] |
| Post subject: | Re: Can you a MPI head on a non injected 1275 without any pr |
Ta, doesn't sound too scared Sent from my iPad using Tapatalk |
|
| Author: | whoopspiggy [ Thu Oct 27, 2016 9:01 pm ] |
| Post subject: | Re: Can you a MPI head on a non injected 1275 without any pr |
peterb wrote: :lol: Crikey, if you put a MPI head on it, you'll have to get it re-engineered as a new car. . I know, it will create expectations of fancy injection stuffSent from my iPad using Tapatalk |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|