ausmini https://www.ausmini.com/forums/ |
|
Pedal Box https://www.ausmini.com/forums/viewtopic.php?f=2&t=94224 |
Page 1 of 1 |
Author: | drmini in aust [ Tue Nov 15, 2016 11:50 am ] |
Post subject: | Re: Pedal Box |
LHD car maybe? Less room there for brake and accelerator pedals due to the tunnel. They have a different throttle pedal as well. |
Author: | winabbey [ Tue Nov 15, 2016 3:21 pm ] |
Post subject: | Re: Pedal Box |
Any part numbers embossed or painted anywhere? |
Author: | flapper [ Tue Nov 15, 2016 3:44 pm ] |
Post subject: | Re: Pedal Box |
drmini in aust wrote: LHD car maybe? Less room there for brake and accelerator pedals due to the tunnel. They have a different throttle pedal as well. That may be it...As we did have a half cut, rover thing here for a while. We were also confused with the small foot pedals? |
Author: | flapper [ Tue Nov 15, 2016 3:45 pm ] |
Post subject: | Re: Pedal Box |
winabbey wrote: Any part numbers embossed or painted anywhere? No numbers any where ![]() |
Author: | Stuwey [ Tue Nov 15, 2016 4:27 pm ] |
Post subject: | Re: Pedal Box |
flapper wrote: we did have a half cut, rover thing here for a while. Would also explain the brake light switch! |
Author: | DavidE [ Tue Nov 15, 2016 6:14 pm ] |
Post subject: | Re: Pedal Box |
flapper wrote: drmini in aust wrote: LHD car maybe? Less room there for brake and accelerator pedals due to the tunnel. They have a different throttle pedal as well. That may be it...As we did have a half cut, rover thing here for a while. We were also confused with the small foot pedals? What ever it was for, you would think that it still would need to straddle the steering column with the brake on the right and the clutch on left. |
Author: | miniresto [ Wed Nov 16, 2016 5:44 pm ] |
Post subject: | Re: Pedal Box |
Attachment: Pedal Box 1.JPG While on the subject of Pedal Box, can any shed any light on this one. It came out of a Genuine GT but I have never seen anything like it. Other GT's I have worked on certainly have a normal looking one. Whoever had modified it did a good job as it looks factory! |
Page 1 of 1 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |