ausmini :: View topic - Med roller tip rockers

ausmini https://www.ausmini.com/forums/

Med roller tip rockers https://www.ausmini.com/forums/viewtopic.php?f=2&t=94426	Page 1 of 1

Author:	GundyGuy [ Fri Dec 16, 2016 10:31 am ]
Post subject:	Med roller tip rockers
Has anyone fitted these rockers and found the spacers to have a fair amount of side clearance. MED said that this isn't a problem after I enquired about a shim kit to remove this excess side play

Author:	drmini in aust [ Fri Dec 16, 2016 12:15 pm ]
Post subject:	Re: Med roller tip rockers
Depends how much... I would sooner have some side play than have them tight. I fitted a set of Minisport UK ones a while back for someone and had to machine 2 of the 3 spacers shorter to stop them jamming.

Author:	GundyGuy [ Fri Dec 16, 2016 4:37 pm ]
Post subject:	Re: Med roller tip rockers
I am talking like maybe 0.025" sideplay

Author:	drmini in aust [ Fri Dec 16, 2016 4:47 pm ]
Post subject:	Re: Med roller tip rockers
A shim would be good but shaft in these is 17.0mm. an odd size.

Author:	GundyGuy [ Sun Dec 18, 2016 6:17 am ]
Post subject:	Re: Med roller tip rockers
I might just turn up some new spacers to fix it

Author:	68Rusty [ Sun Dec 18, 2016 8:26 am ]
Post subject:	Re: Med roller tip rockers
drmini in aust wrote: Depends how much... I would sooner have some side play than have them tight. I fitted a set of Minisport UK ones a while back for someone and had to machine 2 of the 3 spacers shorter to stop them jamming. I had to mix and match the mini sport spacers to even out the tolerance between rockers. I think 1 or two of the spacers were a little longer than the others. Sent from my iPhone using Tapatalk

Author:	GundyGuy [ Wed Dec 21, 2016 9:55 am ]
Post subject:	Re: Med roller tip rockers
Machined up some new spacers 0.030-0.035 wider Sent from my HTC_PN071 using Tapatalk

Page 1 of 1	All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/