| ausmini https://www.ausmini.com/forums/ |
|
| Police carbys https://www.ausmini.com/forums/viewtopic.php?f=2&t=94528 |
Page 1 of 1 |
| Author: | AWOODY [ Sat Dec 31, 2016 12:09 pm ] |
| Post subject: | Police carbys |
For police 1.5" carbys is the needles supposed to be CP4 's with blue springs ? |
|
| Author: | drmini in aust [ Sat Dec 31, 2016 12:11 pm ] |
| Post subject: | Re: Police carbys |
CP4 with red springs I think they had. I had them on Barney's 1293 but found it went better with #6 needles. |
|
| Author: | Bill B [ Sat Dec 31, 2016 1:04 pm ] |
| Post subject: | Re: Police carbys |
Midel's SU catalogue for popular applications recommends for 2 X 1 1/2 inch SUs have MME (rich); CP4 (std); 7 (lean); BLUE spring. I have tried all 3 but run CP4. Obviously depends on cam and other things. Police used CP4 with blue spring in their packs. |
|
| Author: | AWOODY [ Sat Dec 31, 2016 4:05 pm ] |
| Post subject: | Re: Police carbys |
It looks like I have cp4's with red springs. |
|
| Author: | michaelb [ Sun Jan 01, 2017 11:56 am ] |
| Post subject: | Re: Police carbys |
I have had Cp4s in my Cooper S for years with a few different cams and head mods. Seem to work well and never had any issues when the car has been dyno tuned. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|