| ausmini https://www.ausmini.com/forums/ |
|
| Original Door Weather Seals https://www.ausmini.com/forums/viewtopic.php?f=2&t=95049 |
Page 1 of 1 |
| Author: | cooperess [ Thu Mar 16, 2017 8:29 am ] |
| Post subject: | Original Door Weather Seals |
Does anyone know where to get the original grey/silvery coloured door weather seals. The only ones I can find are black. |
|
| Author: | phillb [ Thu Mar 16, 2017 3:57 pm ] |
| Post subject: | Re: Original Door Weather Seals |
This was subject of a long discussion in another thread. The silver pinch mound was originally separate to the rubber. Both are hard to find. Even if you find the pinch mound the rubber is NLA. Some are rubbers close to correct but too thick. Sent from my iPhone using Tapatalk |
|
| Author: | Goldbrocade_62 [ Thu Mar 16, 2017 5:15 pm ] |
| Post subject: | Re: Original Door Weather Seals |
Didn't some of the early holdens have coloured pinchweld |
|
| Author: | winabbey [ Thu Mar 16, 2017 5:27 pm ] |
| Post subject: | Re: Original Door Weather Seals |
phillb wrote: This was subject of a long discussion in another thread. The silver pinch mound was originally separate to the rubber. Both are hard to find. Even if you find the pinch mound the rubber is NLA. Some are rubbers close to correct but too thick. viewtopic.php?f=2&t=84464 |
|
| Author: | bluehishouse [ Thu Mar 16, 2017 9:07 pm ] |
| Post subject: | Re: Original Door Weather Seals |
Do people want the blue pinchweld? Ill need new seals and honestly couldn't be bothered stuffing about for seals. Rather do the one piece stuff. Sent from my SM-G900I using Tapatalk |
|
| Author: | Firefirey [ Fri Mar 17, 2017 7:34 am ] |
| Post subject: | Re: Original Door Weather Seals |
phillb wrote: This was subject of a long discussion in another thread. The silver pinch mound was originally separate to the rubber. Both are hard to find. Even if you find the pinch mound the rubber is NLA. Some are rubbers close to correct but too thick. Sent from my iPhone using Tapatalk phillb is correct I went through this and couldn't come up with anything of the correct size. Saying that I was very lucky to find two new old stock door seals and rubbers/silver pinch weld in New Zealand. If the rubber could be remade most pinch weld is in good condition. I found one size door rubber that was close but it wouldn't allow the door to close nice. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|