| ausmini https://www.ausmini.com/forums/ |
|
| hydro pipes 1970 mini https://www.ausmini.com/forums/viewtopic.php?f=2&t=95217 |
Page 1 of 1 |
| Author: | p7676 [ Fri Apr 14, 2017 5:06 pm ] |
| Post subject: | hydro pipes 1970 mini |
I am manufacturing new hydro pipes and I need the distance from the back under floor panel to the start of the hydro nut it is approx 600mm measured from the horizontal. My old pipes were cut by a brake place to remove the nut looks like he cut back from the nut a long way back.The pipes were to short I am now making new ones, the old story do the job yourself. I bought a good tube bender from All Tools at Warners Bay it does a great job. The hydro pipes are not easy to do I have now figured out how to do them ,start from the front make your own templates of the bends I am now up to the last bends . Also put the nuts on when the pipe is straight. P7676 1 pipe 3m cost $28. |
|
| Author: | stewartp [ Tue Apr 18, 2017 7:33 pm ] |
| Post subject: | Re: hydro pipes 1970 mini |
If you are in SA I have a pair you can measure or have. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|