| ausmini https://www.ausmini.com/forums/ |
|
| Saloon Floorpan - Information https://www.ausmini.com/forums/viewtopic.php?f=2&t=95479 |
Page 1 of 1 |
| Author: | John Sneddon [ Mon May 29, 2017 8:19 pm ] |
| Post subject: | Saloon Floorpan - Information |
There has been some discussion in relation to a change point listed in my book "Australian Mini & Moke - 1961 to 1982" for a change to the floor pan and the fitting of two full length covers in lieu the four small end mounted covers. Research has failed to provide a satisfactory answer thus far however a change listed at YMA2S2 27869 and YKG2S2 2961 may provide some answers. I would be interested to hear from owners of both Deluxe and Cooper S around these build numbers. The question is "Before YMA2S2 27869 or YKG2S2 2961 do you have short hydrolastic covers or full length?" Look forward to your replies. |
|
| Author: | gtogreen1969 [ Mon May 29, 2017 9:24 pm ] |
| Post subject: | Re: Saloon Floorpan - Information |
John YKG2S2 2836 has the early floor YKG2S2 2996 has the later floor I have photos of cars closer to YKG2S2 2961 but they don't show the floors. That's the best I can do. Brad |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|