Give SU Midel a call on 9759 5598 and speak to Silvo...Bill Sivertsen
Thet are in Lakemba 4 Frazer Street
He will point you in the right direction
They deal with everything regarding to Su's carbs
| ausmini https://www.ausmini.com/forums/ |
|
| Carbie Neddles https://www.ausmini.com/forums/viewtopic.php?f=2&t=9561 |
Page 1 of 1 |
| Author: | EST-071 [ Thu Jul 28, 2005 1:08 pm ] |
| Post subject: | Carbie Neddles |
Hi all, I have just rebuilt my carbie and can't get it to run right. I am after some advice on what neddle I should be running. The motor is; 998 stroked to 1100 + 40 thou (I think) 202 head with mild port work (unsure if the chambers have been touched) 998 cooper cam Pulsar dizzy standand inlet manifold with 1 1/2 su and ramflow filter. currently running a AAM but this seems to be to rich. Have used WINSU but it only gives a needle for a HS6 or HIF Any help would be greatful Pete |
|
| Author: | Wombat [ Thu Jul 28, 2005 2:25 pm ] |
| Post subject: | |
Mad Matt is the man to ask - PM him |
|
| Author: | gafmo [ Thu Jul 28, 2005 5:56 pm ] |
| Post subject: | |
Give SU Midel a call on 9759 5598 and speak to Silvo...Bill Sivertsen Thet are in Lakemba 4 Frazer Street He will point you in the right direction
They deal with everything regarding to Su's carbs |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|